Steel KTag Led Bdm Frame Kess Ktag Bdm Frame For K-tag With 22PCS Bdm Frame Adapters Ecm Tuning Programmer Tool 4Pcs Probe Holder

A KTAG BDM Frame Steel with 22pcs Adapter is a specialized workbench tool used by automotive technicians to access and program a vehicle’s Electronic Control Unit (ECU). It provides a stable “bed of nails” platform to connect to the ECU circuit board without soldering.
Core Components
Stainless Steel Frame: A durable, height-adjustable stand that holds the ECU and probes in a fixed position to prevent accidental disconnection during sensitive data transfers.
22-Piece Adapter Set: A comprehensive kit of individual PCB adapters (e.g., Bosch, Siemens, Marelli, Delphi) designed to match the specific pin configurations of different ECU brands.
Acrylic Board & Mesh: A transparent mounting plate that often includes integrated LED lighting (12V) to improve visibility of the small connection pads on the ECU board.
Adjustable Probe Pens: Spring-loaded pins that make direct contact with the ECU’s BDM (Background Debug Mode) or JTAG ports.
Key Uses
ECU Remapping & Tuning: Reading and writing software to increase engine performance or fuel efficiency.
Cloning & Repair: Backing up data from a damaged ECU and writing it to a replacement unit.
Compatibility: While named after KTAG, it is universally compatible with other popular tuning tools like KESS, FGTECH, BDM100, and
Why Professionals Use It
Using a BDM frame is considered much safer than soldering wires directly to an ECU board. It ensures precision alignment and maintains a constant connection, which is critical because even a momentary loss of power or connection during the “flashing” process can permanently “brick” (damage) the vehicle’s computer.
Would you like to know which specific ECU brands are covered by the 22 adapters in this set?
The K-TAG 22pcs Adapter Set is a comprehensive collection of BDM (Background Debug Mode) probe adapters designed for ECU chip tuning tools like K-TAG, KESS V2, and FGTECH. These adapters are typically used with a BDM frame to interface with various engine control units without soldering.
Full 22-Piece Adapter List
The standard set includes the following adapters categorized by their specific vehicle or ECU compatibility:
14AM00T01M: For Bosch
14AM00T02M: For Delphi DCM
14AM00T03M: For Bootloader ST10xx
14P600KT04: For Infineon Tricore EDC/MED17
14AM00T05M: For Marelli MPC55xx JTAG
14AM00T06M: For Delphi MPC55xx JTAG
14AM00T07M: For Denso CN1 Boot
14AM00T08M: For Denso CN2 Boot
14AM00T09M: For Denso CN3 Boot
14AM00T10M: For Denso CN1 AUD
14AM00T11M: For Denso CN2 AUD
14AM00T00M: For Delphi DCI
14AM00TBAS: Base Adapter 1.27
14AM00T14M: For NexusEFI T6 Lotus
14AM00TB02: For Magneti Marelli BDM insert
14AM00TB01: For Siemens BDM insert
14AM00TB03: For EDC7 BDM insert
14AM00T18M: For Magneti Marelli MPC/SPC56xx
14AM00T13M: For Nexus MPC5xx TRW ECU
VAG 1.6tdi: For Siemens-Continental PCR2.1
14AM00T15M: For Toyota NEC76F-20
14AM00T16M: For Toyota NEC76F-26
Technical Specifications
Adapter Width: Approximately 60mm (standard original width).
Thickness: 2mm.
Material: Typically high-quality green PCB with metal probe points.
Compatibility: Works with K-TAG, KESS V2, KTM100, FGTECH/BDM100, CMD, and Dimsport tools.
Are you looking for a BDM frame with LED lighting to use with these adapters, or do you need help identifying a specific ECU pinout?
You can buy a KTAG Steel BDM Frame from Jabedul Dewan Trading LLC through major online marketplaces in the UAE or by visiting their physical location in Dubai.
Online Purchase Options
Jabedul Dewan Trading LLC operates as a verified seller on several platforms, offering various ECU programming and diagnostic tools:
Amazon.ae: They maintain a storefront where they list products like the KTAG V7.020 Chip Tuning Kit and other BDM-related accessories.
Noon.com: You can find their 22 Piece BDM Probe Adapter Kit and BDM frames listed under their seller name, JABEDUL DEWAN TRADING.
Physical Location & Contact
If you prefer to buy in person or need direct technical support, you can visit their office in Bur Dubai:
Address: Office F98, 1st Floor, Al Fahidi Souk, 2, 33c Street, Al Souq Al Kabeer, Bur Dubai, Dubai. Mobile/WhatsApp+971509970171
Operating Hours: Typically open from 09:00 AM to 10:00 PM.
Services: They are known for providing free technical support and specialized vehicle equipment.
Product Features to Note
When purchasing the steel BDM frame from them, ensure it includes:
Material: High-quality stainless steel (more durable than acrylic/plastic versions).
Compatibility: Designed for use with K-TAG, KESS V2, FGTECH, and BDM100.
Included Accessories: Often bundled with 22 BDM adapters and 4 probe pens with LED lighting for easier circuit testing.
These product listings offer details on metal BDM frames compatible with KTAG and KESS tuning tools: