Mitsubishi Flasher USB Key – Full Details, Support & Module Prices
The Mitsubishi Flasher / MUT-3 J2534 USB Security Key is a Kolyandex-based professional solution that can be used with both the Mitsubishi Flasher programming software and the Mitsubishi MUT-3 J2534 Driver. The current listing states that the USB key is required for operation and may come in standard or mini housing. Importantly, says the key cannot be purchased by itself—you must order at least one module with it.
Main Functions
Depending on the activated module, the system supports ECU/ECM and TCM programming, CAN/K-Line communication, OBD2 programming, Bench/direct connection, Flash and EEPROM read/write, checksum processing, ECU recovery, EV control units and dashboard memory programming. The same USB security key can also be used with the MUT-3 J2534 Driver. i
Mitsubishi Flasher / MUT-3 USB Security Key
Price: AED 250
Required for Mitsubishi Flasher modules and MUT-3 J2534 Driver operation. At least one module must be purchased with the key according to the current listing.
1. Mitsubishi MUT-3 J2534 FULL Driver
Price: AED 757.45
The Full Driver allows compatible J2534 interfaces such as Scanmatik 2 and OpenPort 2.0 to work with Mitsubishi MUT-3 software without requiring the original MUT-3 scanner hardware.
Supported functions include:
– Mitsubishi electronic-system diagnostics
– Live data viewing and recording
– Control-unit coding
– ECU programming and software updating
– Adaptation procedures and resets
– Service procedures
– VIN-related control-unit service functions
– ETACS option coding
– Component calibration
– Hybrid/PHEV battery calibration
– ETACS reset and replacement workflows
– Authorized key registration
– Engine, transmission, ETACS and other module firmware updating
– Factory coding restoration
The USB security key is required.
2. Mitsubishi Flasher ECU / Engine Module
Price: AED 342.78
Supports CAN/K-Line and OBD2 ECU flashing with read/write and checksum functions.
Supported processors/applications include:
– MH8104F 512K — 1.5 / 2.4 JDM Lancer X, Outlander XL
– MH8106F 1024K — 1.6–3.0 Lancer X, Outlander XL, ASX, Pajero Sport <2015
– MH8115F 1280K — Outlander 3, ASX
– MH8601 4096K — Eclipse Cross 4B40
– MH8304F 768K — Colt, Pajero 4, Galant 9, Grandis
– MH8105F 512K — Colt CZT, Smart Forfour
– MH8611 2048K — Xpander, Eclipse Cross 4B11
– MH8206F 256K — Lancer 9 MT, EVO 7, EVO 8
– MH8306F 512K — Lancer 9 AT, EVO 9
– MH7202F 128K — Space Star, Carisma and compatible applications
Additional supported functions include reprogramming-counter reset and supported locked-firmware workflows. Some older applications also provide automatic immobilizer-data transfer as part of legitimate ECU replacement.
3. Mitsubishi Flasher Transmission / TCM Module
Price: AED 308.49
Designed for automatic transmission, CVT and supported all-wheel-drive control units through CAN/OBD2, with read/write/checksum functions.
Support includes:
– MH8104F 512K — CVT Lancer X / Outlander XL; 4WD AWC Outlander 3
– MH8106F 1024K — CVT Lancer X / Outlander XL / ASX / Outlander 3 / Mirage
– MH8102F 512K — AT Lancer X / Pajero Sport 2
– MH8115F 1280K — CVT Outlander 3 / Eclipse Cross / Mirage
– Getrag TC-SST — Ralliart / Evolution X
For the listed CVT applications, specifically warns that checksum calculation applies to the main ROM and that the bootloader should not be modified.
4. Mitsubishi Flasher Recovery Module
Price: AED 342.78
Designed for recovery work through CAN or K-Line, on the vehicle or Bench, including Boot-pin procedures. It supports Flash and, on compatible controllers, EEPROM read/write and recovery.
Supported families include:
– MH8106F 1024K
– MH8115F 1280K
– MH8601 4096K
– MH8611 2048K
– MH8102F
– MH8103F
– MH8104F
– MH8105F
– MH8106F
– MH8304F
– MH8302F
– MH8301F
This is particularly useful for legitimate ECU repair/recovery where normal programming communication is unavailable.
5. Mitsubishi Denso Diesel Module
Price: AED 342.78
Designed for Mitsubishi Denso diesel ECU programming.
Supported controllers include:
– SH7058 1024 + 93C86 — silver cover
– SH7058S 1024 + S93A86 — black cover
– SH7059 1536 + S93A86 — black cover
Functions include CAN/direct/OBD2 communication, Flash read/write with CRC correction and EEPROM read/write. It also provides reprogramming-counter reset and supported locked-firmware handling.
6. Mitsubishi EV Module
Price: AED 1,028.30
Designed for Mitsubishi electric and plug-in hybrid vehicle control units. Supports CAN connection on the vehicle or Bench and Flash read/write with checksum on compatible modules
Reviews
There are no reviews yet.