FC200 Highlights:
Protect Original Car Parts
More than 98% of ECUs support BENCH mode and OBD mode, no need to open the cover and punch holes to protect the original car.
Intelligent Recognition
The “identification” function can help users better diagnose whether the ECU module is communicating and check whether the wiring is wrong. If the ECU module can communicate without damage and the wiring is correct, the recognition can be successful, and the chip information, hardware information and firmware information can be read out.
Module Clone
Supports ECU data reading and writing and module cloning, no synchronization matching, no online programming, data sub-regional burning, automatic verification, and maximum protection of chips and modules.
SN Read and Write
Supports engine computer ISN code acquisition for all BMW series (including Mini), which is convenient for key matching and anti-theft maintenance.
Check FC200 BMW ISN Read and Write List
VIN modification
Solve the problem of double VIN or VIN mismatch of vehicles, which is convenient for vehicle maintenance.
Data Processing
Support engine computer data analysis and modification for Audi/Seat/Skoda/Volkswagen models;
Support the shutdown of Bosch MED/EDC17 series engine computer anti-theft system;
Support the TPROT off function of Bosch VAG MEDC17 series, BMW/Mini MEVD17/EDC17 series, Hyundai/Kia EDC17/MED(G)17 series.
FC200 not only support BMW ECU but also support over three thousands of ECUs like KTAG, Kess, Dimsport etc.
Check FC200 Support ECU List
For Checksum Function, Please Check FC200 Support Checksum List for Reference.
There are 3 Operating Modes: CAN-BUS, Bench Mode and Boot Mode
Multi-Language: English, French and Simplified Chinese
For Spanish, Polish Turkish and Traditional Chinese, will need to pay $130 Language Change Service to get authorized seperately with serial number.
Support BOSCH MPC5xx platform mode ECU: MED9.1, MED9.5, MED9.5.10, ME9.0, EDC16CP31, EDC16CP35, EDC16C2, EDC16C8
Need to buy extra FC200 MPC5XX Adapter
Full Version with All License Activated, including Denso and China Delphi.
Free Update Online for One Year. Annual Fee will be $200/year after the first year;
Built-in Model Search
Support ECU model and Bosch number search, avoid the trouble of level selection, and enter the function interface as quickly as possible.
ECU Search: Take the BMW MSV90 engine computer as an example. First select “BMW”, select “ECU” as the search condition, enter “MSV90”, click the search button, and the ECU type will appear.
Bosch Number Search: Take the Volkswagen engine computer as an example. First select “Volkswagen”, select “Bosch Number” as the search condition, and enter “0261S10525”.
Please note that the Bosch number is a ten-digit number and the letters are capitalized. Click the search button, and the ECU type will appear.
Intuitive Wiring Diagram
Highly paid professional designers are hired to produce, 1:1 simulation, bright colors, to avoid user wiring errors;
FC200 Model Support;
Support 4200 kinds of ECUs, involving 80% of the models on the market.
European Cars: Abbas, Alfa Romeo, Aebi, Artec, Aston, Aston Martin, Audi, Bentley, BMW, Bugatti, Citroen, Dacia, CASE, CASE Tractors, Dallara, Deutz, DS, Ducati, Fendt, Ferrari, Fiat, Jaguar, KTM, Lada, Lamborghini, Lancia, Land Rover, MAN, Maserati, McLaren, Mercedes-Benz, MG, Mini, Opel, Peugeot, Piaggio, Porsche, Renault, Royal Enfield, Saab, SEAT, Skoda, Smart, Steyr, UAZ, Vauxhall, Volkswagen (VW), Volvo, Volvo Penta.
American Cars: Can-Am, Caterpillar, Chevrolet, Chrysler, Dodge, Ford, Ford Trucks, Freightliner, GMC, Indian, Internation, Jeep, Lincoln, New Holland, Polaris, Hidu.
Asian Cars: Force, Genesis Motors, Honda, Hyundai, Infiniti, Isuzu, Kassan, Kia, Kubota, Mahindra, Mitsubishi Fuso, Nissan, Subaru, Suzuki, Toyota.
Chinese Cars: Changan, Chery, Foday, Geely, Great Wall, Iveco, Jianghuai, Jiangling, Lifan, Ferguson, Valtra;
CG FC200 Latest Update Information:
CG FC200 V1.3.4.1 Update Log, Jan 28th, 2026
1. New ECU Types Added
Acura / Honda:
KEIHIN 37820-R62-H71 (SH7058)
KEIHIN 37820-R62-H64 (SH7058)
2. New VIN Modification Function (Platform Mode)
Foton / Hafei Minyi / Jinbei: TR40
Jinbei: TR4C, LEC4A, STC-213
3. New “The Three Monitors Not Ready” Repair Function
Foton / Hafei Minyi / Jinbei: TR40 (Platform mode)
Jinbei: TR4C, LEC4A, STC-213 (Platform mode)
Acura / Honda: KEIHIN 37820-R62-H71, 37820-R62-H64 (SH7058)
Dongfeng / BAIC / Great Wall / JAC / JCB / TATA / Mahindra: DCM7.24
Chrysler / Dodge / Jeep: GPEC2A
Chrysler / Dodge / Fiat / Jeep: GPEC3
Jeep: GPEC4
Fiat / Jeep: GPEC4LM
4. Function Optimization
Optimized unlock issue for Roewe 550 – F01R00D674 (ME7.8.8).
CG FC200 V1.3.3.2 Registered Version (2026.01.09)
1.Add ECU types(boot)
Changan Weishitong: STC-113, STC-213
2.Add ECU mileage repair
Shanghai Great Wall V80: EDC17C53
3.Add unready status repair function
Audi/Siata/Porsche/Skoda/Volkswagen: SIMOS18.1, SIMOS18.2, SIMOS18.3, SIMOS18.6, SIMOS18.7, SIMOS18.10
Audi/Bentley/Porsche/Volkswagen: MG1CS002
4.Add CALID code function
Changan Weishitong: STC-113, STC-213
China/Blaze/Chevrolet/Mitsubishi/Suzuki: ME7.8.8, M7
5.Bug fixes
Fix CALID code function execution failure for Lingdi LEC4AF, LEC4AP.
Fix CALID code function execution failure in BOOT mode for ME17.8.8.
Optimize read/write failure of BOSCH TC17 series ECU in platform mode for some devices.
6.System optimization
Optimize VIN change function for BMW N55 series.
Optimize read/write function for ME9.7.
CG FC200 V1.3.3.1 Registered Version (2025.12.31)
1. Added Clone Function
Porsche: SDI7, SDI6.1
Audi/Seat/Porsche/Skoda/Volkswagen: SIMOS18.10, SIMOS18.1, SIMOS12.1, SIMOS12.2
Audi/Porsche/Volkswagen: SIMOS8.5
2. Added Immobilizer Data Parsing Function
Porsche: SDI7, SDI6.1
Audi/Seat/Porsche/Skoda/Volkswagen: SIMOS18.10, SIMOS18.1, SIMOS12.1, SIMOS12.2
Audi/Porsche/Volkswagen: SIMOS8.5, MED9.1(MPC563/4)
3. Added Platform-Supported ECU Read/Write Types
Foton/Hafei Minyi/Jinbei: TR40
Jinbei: TR4C, LEC4A, STC-213
4. Added CALID Code Function
Suzuki/Wuling: EASY_U2W, Easy_U2, Easy_U2.5, Easy_U1 2W
SAIC/BYD/Changan/Chery/Dongfeng/Ford/Geely/Great Wall/JAC/Jinbei/JMC/Lifan/MG/Roewe/Suzuki/Trumpchi/Wuling/Zhonghua: MT22.1 9S12XEP768, MT22.1 9S12XEQ512
Changan/Ford/Jinbei: LEC4AP
Changan/Chery/Dongfeng/FDIC/Ford/JAC/Jinbei/Tangjun: LEC4AF
5. Added Immobilizer Support Types
ME7.5.10/ME7.5.30/ME7.5 (Octagonal Chip 95040)
6. Function Optimization
Optimized Tortoise/Hare Immobilizer Data Algorithm
Optimized Honda 37820 Idle Algorithm
CG FC200 V1.3.3.0 Registered Version (2025.12.28)
1.Added BOOT mode ECU (requires DAP adapter)
Hyundai\Kia\Isuzu\Leyland: DCM7.1AP
JCB\BAIC: DCM7.24
Tata\Mahindra\JAC\Great Wall\Dongfeng: DCM7.1AP, DCM7.24
Toyota\Lexus: DENSO 275036-xxx 76F0038AGD, DENSO 275136-xxx 76F0038AGD, DENSO 275036-xxx 76F0039GD, DENSO 175822-xxx 76F0038GD, DENSO 175822-xxx 76F0039AGD, DENSO 175822-xxx 76F0039GD, DENSO 175822-xxx 76F0040GD, DENSO 275036-xxx 76F0040GD, DENSO 275036-xxx 76F0070, DENSO 275036-xxx 76F0085, DENSO 275136-xxx 76F0085, DENSO 275036-xxx 76F0040AGD, DENSO 275922-xxx 76F0070, DENSO 275992-xxx 76F0070
2.Added PCR2.1, SIMOS8.6 cloning and immobilizer data parsing
3.Added Hyundai-Kia BOOT mode ECUs: SIMK41, SIMK42, SIMK43_AT, SIMK43_MT, SIMK62
4.Added MED17.5.21 not ready state repair
5.Added MG7.9.8 VIN modification and not ready state repair
6.Function fixes
Optimized CAN unlocking for “Big/Small Turtle”
Fixed ME7.5_800 verification failure and unsuccessful not ready state repair
Fixed ACDelco E80 read/write function errors
CG FC200 V1.3.2.6 Registered Version (2025.12.13)
1、New M7 and ME7.8.8 CAN Unlock Function (Industry First. Solves the pain point of K-line and CAN-line not being able to unlock)
Domestic/Buick/Chevrolet/Mitsubishi/Suzuki: ME7.8.8, M7
2、New Not-Ready State Repair Function
BMW: MSV80, MSD80, MSD81, MSD85, MSD85.0, MSD85.4, MSD87, MSD87.2
Audi/Bentley/Porsche/Lamborghini: MG1CS008
Volkswagen Audi/Skoda: MG1CS001
Volkswagen Audi/Skoda/Seat: MG1CS011, MG1CS111
BMW: MG1CS003
Alpina/BMW: MG1CS024, MG1CS201
Volkswagen Audi/Lamborghini/Porsche: MED9.1.1
Lynk & Co/Volvo: MG1CS080
CG FC200 V1.3.2.5 Registered Version (2025.12.05)
1.Added CAN unlock function for M7 and ME7.8.8
China/Buick/Chevrolet/Mitsubishi/Suzuki: ME7.8.8, M7
2.Added models to turn off DTC:
BMW: MG1CS024
Ford: EMS2204, EMS2205
Hyundai/Kia: MD1CS012
Volkswagen: MED9.5
Ferrari: MED9.6.1
3.Functional optimizations:
Optimized the algorithm for repairing “not ready” status for M7, M7.9.7, M7.9.7.1, ME7.8.8, ME7.9.71
Fixed the issue of unsuccessful VIN code change in MEV17.2.1
Fixed the issue of failed identification of Mazda Pxxx SH72543
Optimized the “not ready” status repair function for ME7.5.10, SIM2K-D51
Optimized the DTC turn-off function for:
Land Rover: MED17.8.3x, MED17.9.7, MED17.9.9, MEDC17.9
Mercedes-Benz: MED17.7.x, MD1CP001, ME9.7
B
MW: MEVD17.2.x, MG1CS201, MED17.2
Volkswagen: MG1CS002, MG1CS003, MG1CS011, ME7.1, ME7.5, MED17.1, MED17.1.1, MED17.1.6, MED17.1.21, MED17.1.27,
MED17.5, MED 17.5.2, MED 17.5.5, MED 17.5.21, MED 17.5.25, MED9.1
Ford: MD1CS005
Fiat: ME17.3.0
Peugeot/Citroën: MED17.4.x
CG FC200 V1.3.2.4 Registered Version (2025.12.03)
Added CALID repair support for the following ECUs:
Hyundai / Kia: M7.9.8,
Hyundai / Kia / Dodge: ME17.9.1
BAIC / Bestune / Buick / BYD / Changan / Changhe / Chevrolet /Chery /Dongfeng: ME17.8.8 TC1728 (BOOT), ME17.8.8 TC1767 (BOOT)
Added new ECU types: —Mahindra / Leyland: DCM2.5 —Tata: DCM2.5P — Isuzu: DCM7.1AP
Added VIN repair support: Hyundai: ME17.9.8
Optimized read/write functions for Tata DCM2.5
CG FC200 V1.3.2.3 Registered Version (2025.11.21)
Added ECU Types: Hyundai/Kia: MG7.9.8 (Boot), Tangjun: ME7.8.8
M7, BMW: MSV80.0/ MSD87.2 /MSD85.0, Huanghai: ME7.8.8/M7 / MT62.1, IsuZu: EDC17C81, Soueast:MG1UA008/ MG1UA-UP8,
Zhonghua: ME17.8.8 1728 1767/ ME17 (black), SAIC: MG1UA008
Added BMW Coolant Temperature Settings: MG1CS024,MG1CS201
Function Repair: Repaired and optimized data processing-EDC17CV53, EDC17CV54,EDC17C63
CG FC200 V1.3.2.2 Registered Version (2025.11.17)
1.Added new ECU type: Dongfeng DCM7.1AP.
2.Added new BMW coolant temperature settingS:N54 (MSD87 / MSD87.2),MEV17.2.1
3.Added new Immobilizer Off support: ME7.4.5.
4.Optimized SIM2K-260 password reading,ME7.8.8 and M7 series unlocking functions.
CG FC200 V1.3.2.1 Registered Version (2025.11.13)
1.Fixed an issue where the software would crash during data writing for some ECUs.
2.Fixed an issue where “The three monitor not-ready” functions failed to execute for ECUs such as FC-34, LEC4AF,and LEC4AP.
3.Fixed a data writing failure issue in ME9.7.
CG FC200 V1.3.2.0 Registered Version (2025.11.11)
1. Added PCR2.1 lock and unlock functions.
2. Added ECU types:
Volkswagen/Audi: SIMOS16.1
Mercedes-Benz: ME9.7
Jianghuai: MT92
Foton: MD1CC878
Iveco: MD1CS089
FAW: EDC16C39, MED17.8.32
Zhonghua/Haima: SIM2K-91
Chevrolet: MT60 (TC1766)
Great Wall: EDC17C55
Jiangling/Jianghuai: EDC17C53
Dongfeng/Fuqi: ME17.8.8 (TC1767)
Fuqi: ME17.8.8 (TC1728)
Feidie: MG1UA-UP8, MG1UA008
BAIC/Changan/Qirui/Dongfeng/FAW/Foton/Geli/Jianghuai/Jinbei/Jiangling/Lifan/MG/Roewe/Suzuki/Zhonghua/Trumpchi: MT20U2
3. Added DTC disable function for vehicle models:
Volkswagen: VAG Delphi DCM 3.7, VAG Bosch EDC17_CP24
Fiat: Fiat Marelli MJD6F
Jeep: Jeep Motorola NGC4/NGC5
4.Added PCR2.1 IMMO disable function.
5.Added ME9.7 unready state repair function.
6.Function optimization and bug fixes:
Optimized read/write function for MG1US008.
Optimized mileage repair function for Volkswagen transmission DQ200 TC1784.
Fixed read/write function in platform mode for CPEGD2.20.3.
Optimize the MT62.1 read-write process
CG FC200 V1.3.1.0 Registered Version (2025.09.30):
1、Add new ECU type:
Ford：ESU-131、ESU-411、ESU-418、ESU-415
Volkswagen/Skoda/Porsche/Cupra/Audi：SIMOS18.1
BAIC/Changan/Chery/Dongfeng/Foton/JAC/Jinbei/Jinlu/KAMA/khodro/GoldenDragon/Nanjun/SAIC：FC-34(0F)
Audi/Skoda/Volkswagen：SIMOS18.2、SIMOS18.3、SIMOS18.6
Audi/Volkswagen：SIMOS18.7
Saic/ROEWE: MG1US008
Suzuki：Easy_U2W
Jinbei/FOTON：LEC4AP
LynkCo：MED17
MB：DSM222 MC9S12XEQ512MAL
2、Add anti-theft disable function (including but not limited to)：
BMW：EDC17C41、EDC17C50、EDC17CP45、MEV17.2、MEV17.2.2、MEVD17.2、MEVD17.2.3、MEVD17.2.4、MEVD17.2.5、MEVD17.2.6、MEVD17.2.9、MEVD17.2.G
Volkswagen/Audi：EDC17CP44、EDC17CP54、ME17.5.22、MED17.1.27、MED17.1.1、MED17.1.27、MED17.1.6、MED17.5、MED17.5.2、MED17.5.20、MED17.5.25、MED17.5.5
MB：EDC17C66、EDC17CP10、EDC17CP46、ME17.7、MED17.7.1、MED17.7.2、MED17.7.2、MED17.7.3、MED17.7.5、MED17.7.7、MED17.7.8、MED17.7.X
Land Rover：EDC17CP11、EDC17CP42、EDC17CP55、MED17.0、MED17.8.3、MED17.8.31、MED17.8.32、MED17.9.7、MED17.9.9
PSA：MED17.4、MED17.4.2、MED17.4.4、MEVD17.4.4
Ford：EDC17C10、EDC17C70、EDC17CP05、EDC17CP42、EDC17.2.2
Hyundai-Kia：ME17.9.11、ME17.9.21、MED17.9.8、MEG17.9.12、MEG17.9.21、MEG17.9.8
Maserati：MED17.3.4、MED17.3.5
Volvo：MED17.0
Honda：EDC17C58、EDC17CP06、EDC17CP16、EDC17CP50、MED17.9.3
FIAT：ME17.3.0
China：EDC17C53、EDC17C63、EDC17C81、ME17.U.6、MED17.3.8、MED17.8.10、MED17.8.2
Suzuki：MED17.9.5、MED17.9.61
Volkswagen/Audi/Cupra/Skoda：ME7.5.20
3、Add oxygen sensor disable function：
Honda：SH7058、SH72543
4、Add Not Ready status repair：
Ford：MED17.0、MED17.0.1、MEDG17.0
Volkswagen/Audi/Porsche：SIMOS8.5x
Hyundai-Kia：SIM2K_241、SIM2K-141
Volkswagen/Audi：SIMOS8.3x
Volkswagen：MG1CA811
BAIC/Changan/Chery/Dongfeng/Foton/JAC/Jinbei/Jinlu/KAMA/khodro/GoldenDragon/Nanjun/SAIC：FC-34
Changan/Chery/Dongfeng/Feidie/FOTON/JAC/Jinbei/Tangjun: LEC4AF
Jinbei/FOTON: LEC4AP
WuLing：Easy_U1 2W
BUG fixes：
Optimize SIM2K-250, 260 password reading Function
Fix failure in executing VIN code modification for ME7.8.8, M7, M7.9.7, M7.9.7.1, ME7.9.71, SIM2K-51.4, SIM2K-D51, SEC60
Fix readiness status repair function for Audi SIMOS8.6 system
Optimize readiness status repair function for SIM2K_240, SIM2K_240R
CG FC200 V1.3.0.0 Registered Version
(2025.08.29)
1. New ECU models:
Volkswagen: Marelli 7GV
SAIC/Wuling(Platform Mode): SIM2K-D51, SIM2K-51.4, SCE60
Shuanglong: SIM2K_C201_SCU
Mercedes Benz: DSM MC9S12XEQ512MAL
PSA/Ford/Land Rover/Mazda: SID208
Renault/Dacia: EMS3120
Wuling: SIM2K-34、Easy_U1 2W
JAC/Wuling: FC-34
jinbei(BOOT Mode)：SIM2K-91
KEIHIN：KEIHIN 37820-Rxx-xxx MPC5566
2. Three new features not yet ready have been added:
Hyundai Kia：SIM2K—140、EDC17C57
Volkswagen Audi; MED17.1.27, MED17.1.61, MED17.1.62, SIMOS8.6, MED9.1
MB: SIM271DE20
Domestic: MD1CE108, EDC17CV54, EDC17CV53, EDC17CV44, EDC17CV43, MT22.1, MT22.1.1, MG1US008
Wuling: Easy_U3.6, Easy_U2W, Easy_U2.5, Easy_U1 2W
Geely: Easy_U2
Ford：SID209
Dongfeng/Jianghuai/Isuzu/Deutz：MD1CC878
Suzuki: ME17.9.61, ME17.9.64, ME17.9.6, ME17.9.51, ME17.9.5, MED17.9.63, BAIC/ BESTUNE/ BYD/Changan /Cirelli/ DongFeng/ Faw/ Geely/ Great Wall/ Jianghuai/ Proton/ Trumpchi/
Wuling: MG1UA-UP8
Changan：MED17.9.63
3. New models with DTC function disabled:
Volkswagen：EDC17CP20、EDC17CP44、ME7.1、ME7.1.1
Ford：SID208、SID209
MB：EDC17CP46, MED9.7, ME9.7
PSA：SID807, SID807EVO, EDC17CP42
Renault：SID307, SID310
Volvo：SID807, SID807EVO
Porsche：SDI10.x
4. Add VIN modification function：
Ford：EDC17CP65
5. New verification function:
Dongfeng/Jianghuai/Isuzu/Deutz: MD1CC878
Dongfeng：FC-34
Dongfeng/BAIC/Great Wall/Geely/Cirelle/Proton:MG1UA008
6. Function optimization:
Three types of ECU models：ME7.4.4、ME7.5、TR40、LEC4A、STC-213
Disable DTC function：
Ford_Delphi_DCM_6.1
Hyundai-Kia Bosch EDC16C39
Bosch EDC17C49
VAG Bosch EDC17_CP14
MB_Bosch_EDC17_CP46
BMW Bosch MED17.2
BMW Continental MSD808185
Porsche Continental SDI10.x
VAG Continental SIMOS 12
BMW Bosch MG1CS003
MB Cosch EDC17CP46
Bug fixes:
1. Some Easy-U2W devices are unable to write data
2. Optimization of the failure in reading the Maha 7.1AP function
3. Optimize the function of turning off DTC for some ECUs
CG FC200 V1.2.9.4 Registered Version New (2025.07.26)
1. Fixed the problem that some devices cannot use ECUs such as MSV90, MSV80, MSD80, SIM271DE/KE
2. Optimized functions such as user login and device binding
CG FC200 V1.2.9.3 Registered Version New (2025.07.16) Update Information:
1. Added DTC-OFF function, fourth batch of models:
VAG：MED17.1、MED17.1.1、MED17.1.6、MED17.1.21、MED17.1.27、
MED17.5、MED17.5.2、MED17.5.5、MED17.5.21、MED17.5.25、
MED9.1、ME7.5.10、ME7.5.20、ME7.5.30
MG1CS008、MG1CS001、MG1CS111、MG1CS002
Mercedes：SIM271DE、SIM271KE
psa：MED17.4、MED17.4.2、MED17.4.4、MD1CS003
Land Rover：EDC17CP42、EDC17CP55、MEDC17.9
Porsche：SDI4、SDI6、SDI7、SDI8、SDI9、SDI21.x
Volvo：EDC17CP22、EDC17CP48
Honda：EDC17CP16、
BMW：EDC17CP45
iveco：EDC17CP52
jeep：EDC17CP27
Fiat：EDC17CP52、ME17.3.0
renault：MD1CS006
CNH：EDC17CV41
Man：EDC17CV42
alfa romeo：MED17.3.3
2. Added “Idle speed modification” function for vehicle models
Honda：
37820-Rxx-Hxx SH7058
37820-5xx-Bxx SH72543
Hyundai-Kia：
ME17.9.11、ME17.9.1、ME17.9.11.1、
MEG17.9.12、MEG17.9.13、MED17.9.8、MEG17.9.8、MEG17.9.21、
SIM2K_140、SIM2K_141、SIM2K_341
3. New ECU models added：
JBC/JAC：LINCONTROL LEC4AF、LEC4AP
BAIC/Dongfeng/Geely/Changan/Proton：BOSCH MG1UA008、UP8
DFM-Future：AECS FC-34
VAG：CONTINENTAL Simos8.6
Dongfeng：MD1CC878
Fukuda：MD1CS089
Buick：ME17.U.6
FAW/Jiangling Motors：MD1CE108
BYD/Haima：M7.9.7、M7.9.7.1、ME7.9.71
Bug fixes:
1. Optimize the issue of failed PFlash writing in Wuling Easy-U3.6
2. Optimize the issue of reading and writing failures in some parts of Wuling Easy-U2.5 and U2W
CG FC200 Update V1.2.9.2 Update Information June 18th, 2025:
1. New BMW Coolant Temperature Setting feature added.
2. DTC Off function now supports more vehicle models.
3. Added support for new ECU models.
4. “Three readiness monitors not ready” now supports more ECU types.
5. Added a toggle for the Checksum feature in the Settings.
6. Added more ECU types supporting the VIN Modification feature.
CG FC200 V1.2.9.1 Update Information June 9th, 2025:
1. Added New ECU Models with DTC OFF Functions:
BMW Bosch:
(B48): MD1CP002, MD1CS001, MG1CS003, MG1CS201
(N13\N20\N55\B38): MEVD17.2, MEVD17.2.3, MEVD17.2.4, MEVD17.2.5, MEVD17.2.6, MEVD17.2.8, MEVD17.2.9, MEVD17.2.G, MEVD17.2.H, MEVD17.2.K, MEVD17.2.P
BMW Continental: MSD81, MSV90
Ford-Bosch: MD1CS005
Jaguar/Land Rover-Bosch: MED17.8.31, MED17.9.7, MED17.9.9
Mercedes Benz Bosch: EDC17CP57, MD1CP001, MG1CP002
Volkswagen Bosch: EDC17CP54, EDC17CP74, EDC17C74, MD1CP004, MD1CP014, MD1CS004
2. Added New ECU models:
Wuling:
CONTINENTAL Easy_U2.5 SPC564xx
CONTINENTAL Easy_U2W SPC564xx (1.2.9.2 upgrade)
CONTINENTAL Easy_U3.6 SPC564xx (1.2.9.2 upgrade)
CONTINENTAL Easy_U3D/U3E SPC564xx (1.2.9.2 upgrade)
Geely: CONTINENTAL Easy_U2 SPC564xx
CG FC200 V1.2.9.0 Registered Version (2025.05.24)
New Functions:
1. Added “DTC OFF” function, first batch of models:
BMW BOSCH: EDC16C31, EDC16C35, EDC16CP35, EDC17C06, EDC17C41, EDC17C50, EDC17C56, EDC17CP02, EDC17CP09
Mercedes DELPHI: CRD2.x, CRD3.x
Mercedes BOSCH: EDC16C32, EDC16CP31, DCU17PC42, EDC17C66, EDC17CP01, EDC17CP10
Volkswagen DELPHI: DCM6.2
Volkswagen BOS
CH: EDC16U1, EDC16U31, EDC16U34, EDC16CP34, EDC17C46, EDC17C54, EDC17C64, EDC17C74, EDC17CP04, EDC17CP14, EDC17U01, EDC17U05
Volkswagen CONTINENTAL: PCR2.1, SIMOS8.1, SIMOS8.2, SIMOS8.3, SIMOS8.4, SIMOS8.5
Hyundai/Kia Bosch: EDC16C39, EDC17C08, EDC17C53, EDC17C57, EDC17CP14
Opel GM: E78, E80, E83, E98
Opel BOSCH: EDC16C39, EDC17C11, EDC17C18, EDC17C19, EDC17C42, EDC17C59, EDC17C60, EDC17C84
Mazda DENSO: R2xx, RFxx, SH1x
PSA DELPHI: DCM 3.5, DCM 6.2A, DCM 7.1A
PSA BOSCH: EDC16C34, EDC17C10, EDC17C60
Renault BOSCH: EDC16C36, EDC17C11, DC17C42, EDC17C84
Subaru DENSO: KS/DT
Toyota BOSCH: EDC17C73, EDC17CP07
Toyota DENSO: Diesel Gen3
Land Rover BOSCH: EDC17CP11
Fiat BOSCH: EDC16C39, EDC17C49, EDC17C69
Ford DELPHI: DCM6.1
Ford BOSCH: EDC17C70, EDC17CP05
Honda BOSCH: EDC17_CP06
Iveco BOSCH: EDC16C39, EDC17C49, EDC17C69
Jeep BOSCH: EDC17C79
CNH BOSCH: EDC17C49
2. Newly added ECU models:
Buick: MT60.1 MC9S12XEP768
WuLing: MT60.1 MC9S12XEP768
Shacman: EDC17CV44
Great Wall: M7.9.7, M7.9.7.1, ME7.9.71, MT20U2 MC9S12XET256
ChangHe: MT20U2 MC9S12XET256
HAWTAI MOTOR: ME7.8.8、M7
HAFEI: ME7.8.8、M7 、TR40
DongFeng: EDC17C81
FOTON: TR40
Bug fixes:
1. Fix the issue where some Volkswagen ME17.5.22/24/26 failed to modify VIN
2. Fix the issue of partial SID209 password read failure
CG FC200 V1.2.8.0 Update Information (2025.05.20)
New Functions:
1. Newly added models with “three items not ready” function:
BMW: MSV90、MEVD17.2.2、MEVD17.2.8、MEVD17.2.H
Hyundai/Kia: SIM2K-240, SIM2K_341
2. Volkswagen DQ380/DQ381 TCU adds “mileage repair” function
3. New Hyundai/Kia ECU/TCU:
SIM2K-250_ECU, SIM2K-250_TCU, SIM2K-260, SIM2K-140_ECU, SIM2K-140_TCU, SIM2K-141_ECU, SIM2K-141_TCU
4. Add read-write function, “modify VIN” and “three items not ready” function to Xiali DFO JH30 module
5. Added read-write function, “VIN modification” and “three items not ready” function for SAIC Maxus DFO TR20 module
6. ECU with added verification function: MD1CC878, DCM3.7AP
Bug fix:
1. Optimize the “three items not ready” function of DCM7.1AP
2. Fix the issue where some BOSCH TC17xx ECU prompts that the version is not supported
3. Fix the issue of failed verification of PFlash in CPEGP2.10.1
4. Optimize the verification function of DCM7.1AP
5. Optimize the verification function of GM E37/E78/E83
6. Optimize the verification function of PCR2.1
7. Optimize the verification function of 9HP
8. Optimize the verification function of MT80
CG FC200 V1.2.7.0 Update Information: (2025.04.30)
New Functions:
1. ECU with added “modify VIN” function:
BOSCH TC2xx：
MD1CP001, MG1CS003, MD1CP002, MD1CS006, MG1CP002, MG1CS080, MD1CP004 SPC5777, MD1CP004_ TC298TP,
MD1CS004, MG1CS001, MG1CS002 SPC5777, MG1CS002_ TC298TP, MG1CS111, MD1CP014, MG1CS008_ TC298TP, MG1CS016,
MG1CS017, MG1CS018, MG1CS019, MG1CS032, MG1CS026, MG1CS024, MG1CS201, MD1CS001, MG1CA007
BOSCH TC17xx：
EDC17U01, EDC17U05, ME17.5.20, MED17.1.61, EDC17CP74, ME17.7.8, EDC17CP06, EDC17CP16, DCU17PC42, EDC17CP58, MED17.6.9,
EDC17CP68, EDC17C61, EDC17C47, ME17.8.31, ME17.8.32, EDC17CP05_ TC1797, EDC17CP05 TC1796, ME17.8.3.3, ME17.8.33, ME17.8.5, M17.8.7
BOSCH MPC 5xx：
MED9.1, ME9.0, EDC16CP31, EDC16CP35, EDC16U31, EDC16C2, EDC16C1, EDC16U31, ME9.1.1, MED9.1.1, MED9.1.2
BOSCH ST10xx：ME7.7.0、ME7.9.9、ME7.1.1、ME7.8.2、ME7.6.4
CONTINENTAL/Siemens：
SIM271KE, SIM271DE, SDI7, SDI6.1, SIMOS8.4x, SID208, SID310, EMS3110, EMS2511, EMS24xx, GPEC3, GPEC2A, GPEC4, GPEC4LM, GPEC2
DENSO：
MB279700-9500, MB279700-9811, MB279700-9801, MB279700-96xx, RF7x, RF8x, 33920-67P0, R2xx, Pxxx, S5xx, SHxx, 275700_7082, RA6, 4N14,
23740_5Sxxx_Gen2, 23740-5Sxxx_Gen2, 23740-3Nxxx_Gen1, Subaru SH72531, 112800 SH72531
GM: E38, E39, E39A, E78, E80, E83, E98, E84
Hyundai/Kia: SIM2K_240_ECU, SIM2K_241_ECU, SIM2K_240R_ECU
Mitsubishi: E6T6xxxx, E6TAxxxx
DELPHI：DCM3.7AP, DCM3.5
Marelli：8TDW
2. Add the “Three Not Ready” function:
Peugeot/Citroen：MED17.4.2 TC1767, MED17.4.2_ TC1797, MED17.4.4, MEV17.4, MEVD17.4.4, MEV17.4.2 TC1766, MEV17.4.2_ TC1767
Maserati：MED17.3.4, MED17.3.5
BENZ/Smart：ME7.7.0
BMW：ME17.2.1
3. ME17.8.8 adds CALID modification function
4. Dongfanghong tractor EDC17CV54 time repair
5. JMC EDC17C55 mileage repair
6. Added Volkswagen MG1CA811
CG FC200 V1.2.6.0 Registered Version New (2025.02.27)
New Functions:
1. “Three readiness monitors not ready” function:
DELPHI: MT22.1, ME22.1.1, MT22U
Jiangling/Foton/Great Wall: EDC17C81/EDC17C63/EDC17C53
Jaguar Land Rover: MED17.0.1, MED17.0, MED17.9.7, MED17.9.8, MED17.9.9, MED17.8.31, MED17.8.32
Fiat: ME17.3.0
2. ECUs with newly added checksum: MT20U, MT22U, MT20U2, MT22.1, MT22.1.1
3. M7, ME7.8.8 added the function of modifying CALID code
4. Added Wuling SIM2K-D51 module, and supports verification function, VIN modification and three readiness monitors not ready functions
5. Added Wuling SCE60 module
6. Added Hyundai SIM2K-47 module
7. Added ECUs with VIN modification function:
Marelli ECU: 8GMK, 8GML, 9GC
Bosch ECU: ME7.4.5, M7.9.8
8. Added ECUs:
Volkswagen: simos12.1
Hyundai Kia:
MEDG17.9.8
Bug fixes:
1. Optimized the read and write functions of ME17.9.23 and ME17.9.21.1, EDC17C69
2. Fixed the problem of some DCM7.1APs failing to read and write PFlash
3. Optimized three readiness monitors not ready of Wuling SIM2K-51.4
FC200 V1.2.5.2 Registered Version (2025.01.18)
New Functions:
1. Added three ECUs with unready functions for domestic models:
Silver housing: ME17, ME17.8.8, MED17, MED17.8.10, MED17.8.2, MED17.8.21
Black housing (Black): ECU6.1, ME17, ME17.U.6, UP6
2. Added three ECUs with unready functions for Hyundai Kia: MEG17.9.12, MEG17.9.13, MEG17.9.2, MEG17.9.21, MEG17.9.8, ME17.9.1, ME17.9.11, ME17.9.11.1, ME17.9.21, ME17.9.21.1, MED17.9.30, MED17.9.8, EDC17CP14, ME17.9.8
3. Added Jinbei Lingdian ECU and supports VIN change and three unready functions: LINCONTROL LEC4A, LINCONTROL STC-213
4. Added Volkswagen Skoda ME7.5.20 three unready and VIN change functions
5. Chery ME7.9.7 added ExtFlash verification algorithm
6. Added Bosch ECU: UP6 TC1728, MED17.8.21, ME17.9.8
7. Added Huasong N20 model and supports VIN code change
8. Added BOSCH VIN change ECU: MEG17.9.13, ME17.9.1, EDC17CP48, EDC17C69, EDC17C83, ME17.3.0, EDC17C10, EDC17C58, ME17.0.3, EDC17C70
Bug fixes:
1. Fixed the issue of ME17/ME17.U.6/ECU6.1 failing to modify VIN
2. Optimized the verification algorithm of M7/ME7.8.8/M7.9.7/SIM2K-51.4
3. Fixed some bugs and optimized software performance
FC200 V1.2.5.1 Registered Version (2025.01.15)
New Functions:
1. Added Wuling SIM2K-51.4 read/write, VIN modification, and three unready functions
2. Added Jinbei Lingdian TR40 read/write, VIN modification, and three unready functions
3. Added three unready functions of Volkswagen ECUs: MED17.1.6, MED17.1, MED17.5, MED17.5.1, MED17.5.2, ME17.5.22, MED17.1.10, MED17.5.20, MED17.5.25, MED17.5.5, EDC17CP14
4. Added three unready functions of BMW N20/N55/B38/N13 ECUs: MEVD17.2.5, MEVD17.2.4, MEVD17.2.9, MEVD17.2.P, MEVD17.2, MEVD17.2.6, MEVD17.2.G, MEVD17.2.K, MEVD17.2.3
5. Added verification function ECUs: ME7, ME7.8.8, ME7.9.7, ME7.9.71, M7.9.7, M7.9.7.1, ME7.5.20
Bug fixes:
1. Fixed the problem of failure to write PFlash data in some ME17.9.64
2. Fixed the problem of failure to backup data of Honda Keihin KEIHIN series ECU
3. Fixed the problem of PFlash verification failure of Hyundai Kia CPGDSH2.26.1
4. Fixed the VIN code change function for ME17.9.1, ME17.9.11, ME17.3.0, and EDC17C81
5. Fixed some bugs and optimized software performance
FC200 V1.2.5.0 Registered Version New (2025.01.06)
New Functions:
1. Added the “Three readiness monitors not ready” function of GM E37\E38\E39\E39A\E78\E80\E83\E84 ECU
2. Added MELCO (Mitsubishi) series BENCH mode ECU:
MELCO E6T6xxxx MH8501F
MELCO E6TAxxxx MPC5746R
MELCO E6T85xxx MH8601 test
MELCO E6T8xxxx MH8115 test
MELCO E6T7xxxx MH8611 test
MELCO E6T86xxx MH8115 test
3. Added BOSCH (Bosch) BENCH mode ECU\TCU:
MG1CS080 TC275TP test
INVCON2.3 TC1797
HV17.4.1 TC1797
4. Added the “Repair of Lovol engine duration” of data processing to Lovol ECU: EDC17C63, EDC17CV54
5. Added the BOOT mode read and write function for GM E83
6. Added the function of reading and writing DFlash, PFlash, Maps, and ExtEEPROM separately for Mercedes-Benz SIM271DE
7. Added the “Unlock” function of VOLVO MB279700-96xx
8. Added “Read Password” function in Hyundai Kia CPEGP2.10.1 boot mode
9. Bug fixes
Optimized the “Turn off anti-theft” function of EDC17C53, EDC17C63, and EDC17C81
Optimized Porsche SDI10.x ECU wiring diagram
Fixed the problem that Mercedes-Benz CRD3P.C0 and CRD3P.D1 can not be read and written
Fixed the problem that DCM2.5 failed to write PFlash
Fixed the problem that M7 failed to recognize but can read and write
Fixed the problem that VGS2-FDTC failed to recognize after the updated version
Optimized the process of M7.9.7, M7.9.7.1, ME7.9.7, ME7.9.7.1 to handle the “Three readiness monitors not ready” function
Fixed the problem that Honda 37820 SH7058 does not communicate with ECU after writing data
CG FC200 V1.2.4.0 Registered Version New (2024.11.25)
1. Added Paypal payment function in non-simplified Chinese version
2. Added DELPHI BOOT mode ECU:
DCM6.2V MPC5674
DCM6.2A MPC5674
DCM6.2C MPC5674
DCM3.5 MPC5565
DCM6.1 TC1797
3. Added MARELLI BOOT mode ECU:
8TDW MPC5553
8TDF MPC5553 test
8GMF MPC5553 test
8F3 MPC5553 test
8DF MPC5553 test
8GMK SPC564A
8GML SPC564A test
8GSF MPC5565 test
8GMF MPC5565 test
8DF MPC5565 test
8F2 MPC5565 test
8F3 MPC5565 test
8GMW MPC5565 test
8GSW MPC5565 test
8DS MPC5565 test
9GF SPC564A test
9GC SPC564A test
9DF SPC5644 test
9DF_HW2 SPC5644 test
10GF SPC564A test
METATRON_MF4 MPC5674F test
4. New GM TCU: ACDelco T87A SPC564A, BOSCH T93 SPC5888
5. Other new ECUs:
CONTINENTAL SID605 SPC564A test (Boot mode)
BOSCH MED17.7.7 (Boot mode)
BOSCH EDC17CV54 (BENCH/Boot mode)
ACDelco E78 MPC5566 (Boot mode)
6. Other new features:
BOSCH EDC17CV54 adds VIN change function
M7, ME7.8.8 adds unlock function
Adds Volkswagen (WV) MED17.1, MED17.5.5 password reading method
7.
S12XET256
MT20U2 MC9S12KG256
MT22.1 MC9S12XEQ512
MT22.1.1 MC9S12XET256
2. Added DELPHI ECU:
BENCH mode:
China DCM7.24
China DCM7.1AP
Hyundai/Kia DCM7.1AP
Tata DCM2.5
BOOT mode:
DCM2.7AP
3. Added DENSO ECU:
Toyota:
GEN3 R7F701202
GEN3 R7F701216
Mazda:
Pxxx SH72543
S5xx SH72546
SHxx SH72543
Suzuki:
33920-xxxx_1N83 MPC5746
4. Add PFlash verification function to Denso ECU
5. Add PFlash/ExtFlash verification function to BOSCH MPC5xx ECU
6. Optimize Flash verification function for BOSCH MG1/MD1 ECU
CG FC200 V1.2.0.0 Registered Version NEW (2024.05.11)
1. Added CONTINEN type ECU: SID209, SIM2K-341 (ECU)
2. Optimize the verification function of BOSCH/CONTINENTAL/KEFICO/DELPHI TC17 ECUs
3.MED17_China adds a new password reading function
4. Added BOSCH TC17 ECUs: MINI: MED17.2.2, Ford/MB: DCU17PC01, Hyundai: DCU24, Peugeot:
ME17.9.53, BOBCAT: EDC17C87, McLaren: ME17.8.33
5. Added Renesas chip ECU:
Honda: KEIHIN 37820-xxx-xxx SH7058, DELPHI DCM3.7AP_CHINA SH72544
FAW: DENSO TD112700-xxxx SH72530
Hyundai: DENSO 33910-05005 adds the function of reading DFlash
6. Added Delphi TC2xx ECU: DCM7.1A/DCM7.1B
CG FC200 V1.1.9.0 Registered Version (2024.03.23)
1. Add BOSCH ST10 ECU and add verification function:
Abarth: ME7.9.10
Alfa Romeo: ME7.9.10, MED7.1.1
Audi: ME7.5.30, ME7.5, MED7.5.10
Bentley: ME7.1.1
BMW: ME7.2
Chery: ME7.9.7, M7.9.7, ME7.9.71
Chrysler: ME2.8.1
Peugeot Citroen: M7.4.4, ME7.4.4, ME7.4.9, ME7.4.6, VALEO_J34P
Ferrari: ME7.1.1
Fiat: ME7.9.9, MED7.6.2, ME7.9.10, MED7.1.1, VALEO_J34P
Geely: M7.9.7
Honda: ME7.9.7, ME7.9.3
Hyundai Kia: M7.9.7, ME7.9
Lancia: MED7.6.2, MED7.1.1, ME7.9.10
Maserati: ME7.1.1
Mercedes: ME2.8, ME2.8.1
Mitsubishi: ME7.7.1
Opel: ME7.6.4
Polaris: M7.9.7
Porsche: ME7.5, ME7.8.1, ME7.2, ME7.8
SAIC: ME7.8.8
Volkswagen Seat Skoda: MED7.5.10, ME7.5.30, ME7.5
Toyota: ME7.9.5
Volvo: ME7.0, ME7.0.1
2. Added DENSO ECU:
Mazda: DENSO R2AA/R2AB/R2AC/R2AJ/R2AK/R2AW/R2AX/R2BG/R2BP/R2BR/R2BS, DENSO RF7x/RF8x
Hyundai/Kia: DENSO 33910-05005
Suzuki: DENSO 33920-67P0
3. Other new ECUs:
Chevrolet/Holden/Opel: DELPHI DCM3.7AP
Suzuki: ME17.9.64
Ford: MG1CS017
4. A new button for “Vehicle Fault Code Support List” is added to the main interface.
BUG FIXED:
1. Fix the problem of EEPROM reading error in ME7.5.20/ME7.5.10/ME7.5 and other ECUs
2. Fix the problem that some ECUs such as DQ380/1 report a program error when writing after verifying PFlash.
3. Fixed the problem of failure to modify VIN in new versions of Mercedes-Benz MED17.7.3/ME17.7.7 and Volkswagen MED17.5.25/MED17.5.5 models.
V1.1.8.0 Registered Version (2024.02.01)
1. Added Hyundai/Kia TCU: TC60.x.x
2. M7/ME7/M17 ST10F725/6 ECU adds the function of turning off the anti-theft system
3. GM E80 adds BOOT mode
4. BMW’s new ECUs: MEVD17.8.4, ME17.2.42
5. Peugeot/Citroen MED17.4.2 TC1767 new platform mode
6. EDC17C84 adds the function of modifying VIN
BUG FIXED:
1. Fix the problem that some MD1CS089 cannot start the car after reading and writing data.
2. Fix the problem of Mercedes-Benz 9GT TCU cloning failure
3. Fix the problem of failure to write PFlash in GM 6T/6L gearbox
4. Fix GPEC2A and other unrecognized problems
5. Fix the problem that some ECUs such as EDC16C1 and EDC16CP35 fail to write to ExtFlash.
6. Volkswagen MED9.1 MPC563/4 supplementary wiring diagram
7. Hyundai/Kia EDC17CP14 corrected reading password wiring diagram
8. Volkswagen MED17.5 platform mode supplements other wiring diagrams
9. IVECO EDC17C69 supplementary wiring diagram
FC200 V1.1.7.0 Registered Version (2023.11.24)
1.Add Volvo Electric Equipment ECU: MB279700-9500, MB279700-9801, MB279700-9811
2.Add Audi ECU: Simos8.4x, Simos12.x
3.New Hyundai ECU/TCU: SIM2K-240_ ECU, SIM2K-341_ TCU
4.Fix issues with some ECU cloning failures: MED17.3.1/MED17.7.2/MED117.7.3/MED17.5.5 and general Exx series, etc
5.Fix the issue of some universal ECU recognition failures: E78/E39/E39A/E80, etc
6.Lovol added ECU: EDC17CV43
7.BMW adds ECU: MEVD17.8.4
8.Added ECU for PFlash verification algorithm: MSV90, SID807EVO, EMS3110, SIM2K-240_ ECU, SIM2K-341_ TCU, Simos12. x, Simos8.4
9.Add and modify ECU for VIN: CPGDSH1.21.6, CPGDSH2.2x. x
10.Optimize the PFlash verification algorithm for DQ380
11.Fix some bugs and optimize software performance
FC200 V1.1.6.0 Registered Version (2023.10.16)
1.Added CONTINENTAL TC17 type engine computers (BOOT mode): SID310, SID807EVO, EMS3110;
2.Added CONTINENTAL SPC5xx type engine computers (BOOT mode): GPEC3, GPEC2A, GPEC4, GPEC4LM, GPEC2;
3.Added CONTINENTAL TC17 type engine computer (BOOT mode): SIMOS8.2x, EMS2511, EMS24xx, EMS2205, SDI9, SDI3, SDI4, SDI10.x, SDI21.x;
4.Added new GM type engine computer: E98;
5.Added the Flash verification function of the gear box computer: DQ380, 8HP, 7DCT300, 9GT-VGS-NAG3;
6.Added PFlash verification function for CONTINENTAL TC17 engine computer;
7.Added the function of independently reading and writing DFlash/PFlash/ExtEEPROM/ExtFlash: MSD80/MSD81/MSD85/MSD87/MSV90/SIM271KE;
8.Fix some BUGs and optimize software perf
Bug fixes
Optimized the main interface ECU search function
Solved the PFlash data encryption problem of M7, ME7.8.8
Fixed the MT86 PFlash reading and writing failure problem
Iveco BOSCH EDC17C69 ECU adds BENCH mode connection diagram
Optimized menus, wiring diagrams and other functions
CG FC200 V1.2.3.0 Registered Version (2024.10.19)
1. Added FC200 device binding function, after binding, you can get the latest news related to the device in time
2. Added DENSO SH72531 type ECU:
Nissan: 23740-5Sxxx_Gen2, 23740-3Nxxx_Gen1
Subaru: Subaru SH72531, 112800 SH72531
3. Added Honda KEIHIN type ECU:
Honda/Acura: KEIHIN 37820-xxx-xxx SH72543, KEIHIN 37820-Rxx-xxx SH7058, KEIHIN PGM FI SH7058
4. Added Volkswagen ECU mileage repair function:
MED17.5.25, ME17.5.22, MED17.1.27
5. Added PFlash checksum function for GM Exx ECU
6. Other newly added ECUs:
BOSCH MG1US008 (BENCH mode)
BOSCH MD1CE100 (BENCH mode)
Hyundai/Kia KEFICO CPEGP3.20.1 (BENCH mode)
Hyundai/Kia KEFICO CPEGP2.10.1 (Boot mode)
Hyundai/Kia CONTINENTAL SIM2K-240R (Boot mode)
GM AcDelco E84 (BENCH/Boot mode)
GM BOSCH ME9.6.1 (BENCH mode)
7. Bug fixes
Fixed the problem that Suzuki BOSCH ME17.9.64 BENCH mode cannot connect
Fixed the problem that GM E39A failed to read EEPROM
Fixed the problem that TATA DCM7.24 failed to checksum
Fixed the problem that TATA MD1CS018 failed to checksum
Fixed the problem that CPEGD2.20.x failed to checksum
Fixed GM E39/E39A checksum issue
Fixed Ford SID208/SID209 password reading failure issue
Fixed DCM6.2AP, GPEC2, etc. data writing failure issue
CG FC200 V1.2.2.0 Registered Version NEW (2024.09.11)
1.FC200 devices within the service period can use this function for free. Devices that are not within the service period will not be able to obtain authorization after the annual subscription fee expires (Except Boot Mode).
DELPHI ECU:
BYD/BAIC/Chery/Dongfeng/FAW/Geely/GreatWall/JAC/JMC/Lifan/MG/SAIC/Trumpchi:
ChinaDelphi MT20U MC912DT128
ChinaDelphi MT22U MC9S12XET256
ChinaDelphi MT20U2 MC9S12KG256
ChinaDelphi MT22.1 MC9S12XEQ512
ChinaDelphi MT22.1.1 MC9S12XET256
ChinaDelphi MT34 TCxx
ChinaDelphi MT80 TC1766
DELPHI DCM6.2AP MPC5674
DELPHI MT80 TC1766
DELPHI MT80.1 TC1766
DELPHI _DCM7.24_CHINA TC277T
DELPHI _DCM7.1AP_CHINA TC277T
DELPHI DCM3.7AP_CHINA SH72544
Indian AshokLeyland:
DELPHI _DCM7.1AP_AshokLeyland_test TC277T
Chevrolet/Luxgen:
DELPHI MT80 TC1766
DELPHI MT80.1 TC1766
DELPHI DCM3.7AP SH72544
Holden/Opel:
DELPHI DCM3.7AP SH72544
Citroen/DS/Opel/Peugeot/Toyota
DELPHI DCM7.1A TC297TP
DELPHI DCM7.1B TC297TP
Dodge/Freightliner:
DELPHI CRD2.x_ MPC556x
DELPHI CRD3xx TC1797
Hyundai/Kia:
DELPHI MT86 TC1766
DELPHI _DCM7.1AP_Hyundai TC277T
Mahindra/TATA/JCB:
DELPHI _DCM7.24_test TC277T
DELPHI DCM2.7AP SPC5644
DELPHI _DCM7.1AP_TATA TC277T
DELPHI DCM2.5 XC2080M
Benz:
DELPHI CRD2.x_ MPC556x
DELPHI CRD3xx TC1797
DELPHI CRD3xx TC1793
DELPHI CRD3.E1 TC1793
DELPHI CRD3.F1 TC1793
DELPHI CRD3E.1 TC1793
DELPHI CRD3P.B0 TC1793
DELPHI CRD3P.C0 TC1793
DELPHI CRD3P.D1 TC1793
DELPHI CRD3P.G0 TC1793
DELPHI CRD3 TC1797
DELPHI CRD3.7 TC1797
DELPHI CRD3.10 TC1797
2. FC200 devices within the service period can use this function for free. Devices that are not within the service period will not be able to obtain authorization after the annual subscription fee expires — DENSO ECU:
Isuzu/Hino:
DENSO 275700_7082 SH72546(Test)
Mitsubishi:
DENSO MITSUBISHI_L200 SH72543(Test)
DENSO 4D56 SH7059(Test)
DENSO RA6 SH7059(Test)
DENSO 4N14 SH7059(Test)
Fiat:
DENSO RA6 SH7059(Test)
Nissan:
DENSO D3 SH7059(Test)
DENSO D4B SH7059(Test)
DENSO D40 SH7059(Test)
DENSO 3W SH7059(Test)
DENSO 23740_5Sxxx_Gen2 SH72530(Test)
DENSO G1 SH7059(Test)
DENSO 1G SH7059(Test)
DENSO H1 SH7059(Test)
DENSO Pxxx SH72543
Opel/Vauxhall:
DENSO 275xxx-xxx SH7059(Test)
DENSO GM SH7055(Test)
Subaru:
DENSO KH SH7059(Test)
DENSO KS SH7059(Test)
DENSO ZY SH7059(Test)
DENSO BF SH7059(Test)
DENSO GG SH7059(Test)
DENSO NN SH7059(Test)
DENSO KO SH7059(Test)
DENSO MB112700 SH72543(Test)
DENSO Subaru SH72543(Test)
FAW:
DENSO TD112700-xxxx SH72530
Hyundai/Kia:
DENSO 33910-05005 SH72530
Mazda:
DENSO R2xx SH7058
DENSO RF7x SH7058
DENSO RF8x SH7058
DENSO Pxxx SH72543
DENSO S5xx SH72546
DENSO SHxx SH72543
Scion:
DENSO Pxxx SH72543
Suzuki:
DENSO 33920-67P0 SH72530
DENSO 33920-xxxx_1N83 MPC5746
Toyota:
DENSO GEN3 R7F701216
DENSO GEN3 R7F701202
DENSO Pxxx SH72543
Volvo
DENSO MB279700-9500 SH72543
DENSO MB279700-96xx SH72546
DENSO MB279700-9811 SH72546
DENSO MB279700-9801 SH72546
Others
BOSCH MED9.6.1 MPC561/2
CONTINENTAL SIM2K_241_ECU TC1767
BOSCH Hongqi_H9_48V_Battery TC1724
KEFICO CPEBI2.20.2 TC1782
4. MSV80 Added a new button to read password
5. GM Exx/6T/L ECU/TCU of vehicle models optimized connection identification function
6. Fixed the issue of GM E80 connection failure
7. CONTINENTAL SID208, SID209 Added the function of reading password
CG FC200 V1.2.1.0 Registered Version (2024.06.25)
1. Added China DELPHI ECU, supporting OBD and BENCH modes:
MT20U MC912DT128
MT22U MC9
ormance.
FC200 V1.1.5.0 (2023.08.18)
1.New platform mode engine for Bosch MPC5xx class: (Note: To be used with MPC5xx adapter)
EDC16U31、EDC16C1、EDC16C10、EDC16C31、EDC16C32、EDC16C34、EDC16C35、EDC16C36、EDC16C37、EDC16C39、EDC16C41、EDC16C9、EDC16CP33、EDC16CP34、EDC16CP36、EDC16CP39、EDC16U34、EDC16UC40、ME9.1.1、ME9.6.1
2.Newly added BOSCH TC17 series platform and boot mode engines: DCU17HD01、DCU17PC42、DCU17PC43、DCU17CV51、DCU17PC_ DNX
3.KEFICO TC series engines add PFlash verification function
4.GM series engines add PFlash verification function
5.Fix the issue where the 8HP transmission does not support the E-series (R5F72519R)
6.Optimize the verification algorithm for VGS2-FDCT type transmissions
7.Fix some MD1CS089 engine connection failure issues
8.Fix some bugs and optimize software performance
FC200 V1.1.4.0 Registered Version NEW (2023.07.17)
1.Newly added CONNECTAL TC17 platform mode engines: SDI6, Simos8.3x, Simos8.5x
2.Newly added CONNECTAL TC17 BOOT mode engines: SDI6, SDI7, Simos8.1x, Simos8.3x, Simos8.5x, SID208, PCR2.1
3.BOSCH MPC5xx chip ECU adds verification function
4.New platform mode engine: MD1CS089
5.New Volkswagen transmission mileage repair function: DQ200 TC1784
6.Fix the function of modifying the VIN of Volkswagen ME17.5.22/24/26 and other engines
7.Fix some PCR2.1 write PFlash failure issues
V1.1.3.0 Registered Version NEW (2023.05.24)
1.Newly added CONNECTAL TC17 platform mode ECU: PCR2.1, SDI7, DPS6
2.Add BOSCH MPC5xx platform mode ECU: MED9.1, MED9.5, MED9.5.10, ME9.0, EDC16CP31, EDC16CP35, EDC16C2, EDC16C8
3.New Volkswagen TCU mileage repair function: DQ200 TC1766, DQ250, VL381, DL382
4.Add Hyundai/Kia/Ssangyong KEFICO CPEGD2.20. x ECU functions: platform mode data read and write, modify VIN functions
5.Add Mercedes Benz CRD2. x MPC556x engine platform mode
6.DELPHI TC17 chip ECU adds PFLASH verification function
7.ECU with PFLASH verification function added to BOSCH ST10F chip: ME7.4.5
8.GM 6T30, 6T80, 6L80 TCU added PFLASH verification function
9.Diesel ECU EDC17C53, EDC17C63, EDC17C81 and other newly added anti-theft system shutdown functions
CG FC200 Version V1.1.2.0 Update Notice on Apr 7th, 2023
1. Fix the problem of engine recognition and read/write failure in GM E38, E67 and E39
2. Add GM E37, E39A, E78, E80 and E83 engine platform mode
3. GM E38, E67, E39 and E39A engines add Ext FLASH verification function
4. Add the “time repair” function of “Lovol harvester” to support the EDC17CV53 engine of Lovol harvester
5. Benz VGS-FDCT, VGS2-FDCT and VGS-FCVT gearbox add PFLASH verification function
6. Volkswagen DL501 Gen2 and DL382 transmissions add PFLASH verification function
7. Add BOSCH ST10 engine: M7.4.4, ME7.3.2, ME7.4.4
8. Fix the connection failure of DELPHI CRD3.10, CRD3.xx TC1797 and other engine platform modes
CG FC200 V1.1.1.0 Software Update Notice on Feb 1st, 2023
1. Setup interface adds-Server Selection function
2. Optimize the device activation interface (add the “Activate” prompt)
3. Repair the failure problem of the Bosch query abroad
4. Added GM AcDelco transmission platform mode: GM 6T30/35/40/45/50, GM 6T70/75/80, GM 6L45/50/80/90
5. New BOOT mode of BOSCH ST10 engine: ME7.1.1, ME7.5.10, ME7.8.2, and MED 7.6.2
6. New BOSCH TC17 engine platform mode: ME17 TC1728 (China)
7. New BOOT mode of KEFICO TC17 engine: CPGDSH2.2x.x, CPGDSH1.26.1, KME 1.9.3.1
8. New BOSCH VAG gearbox PFLASH calibration function: DQ200 TC1784, DQ200 TC1766, DQ250 TC1766, DL501Gen1 TC1766, VL381 TC1766
9. Newly modified VIN model: MED 17.8.3
CG FC-200 V1.1.0.0 Software Update Notice on Dec 13th, 2022:
1. Added DELPHI platform and BOOT engine: CRD3.10, CRD3.E1, CRD3.F1, CRD3E.1, CRD3P.B0, CRD3P.C0, CRD3P.D1, CRD3P.G0, and CRD3xx
2. Added BOSCH BOOT engines: ME7.5.20, M7.9.5, ME7.9.51, and ME7.9.52
3. Add PFLASH check function for MG1C, MD1C SPC5777 and TC298TP engines of BOSCH
4. Added password reading function in the platform mode of GM engine E39
5. Optimize the PFLASH verification algorithm of BOECH’s TC17 series engines
6. Added BOSCH platform engine: EDC17CV53
7. Fix some bugs and optimize software performance’
The CG FC200 is an advanced automotive diagnostic and programming tool designed for ECU/EGS cloning, data reading/writing, and maintenance. It is a powerful upgrade to the earlier AT200.
Core Capabilities
Broad Compatibility: Supports over 4,200 types of ECUs/EGS, covering approximately 80% of vehicle models on the market, including gasoline, diesel, and hybrid platforms.
Operating Modes: Features 3 distinct modes for maximum flexibility:
OBD Mode: For direct programming through the vehicle’s diagnostic port.
Bench (Platform) Mode: Allows for reading and writing data without opening the ECU shell, protecting original parts.
Boot Mode: Used for more advanced operations that require direct connection to the ECU board.
Specialized Functions:
BMW Experts: Offers 100% accurate ISN code analysis and acquisition for all BMW series (including Mini), which is essential for key programming and anti-theft maintenance.
Cloning & Repair: Supports module cloning without synchronization matching or online programming, VIN modification, and DTC (Diagnostic Trouble Code) shielding.
Data Processing: Includes functions to turn off anti-theft systems for various Bosch series (MED/EDC17) and TPROT off for VAG and BMW/Mini series.
Software & License Details
Full Version: Comes with all licenses activated at no extra charge.
Free Updates: Typically includes one year of free online updates; after the first year, an annual subscription fee (approximately $125–$199) applies to maintain server-related functions.
Multilingual Support: The interface supports English, French, and Simplified Chinese for free, with others like Spanish, Polish, and Turkish available for a separate fee.
User Support: The software features an intuitive “brand-model-ECU” structure and provides visualized 1:1 wiring diagrams to minimize user error.
For a complete list of supported vehicles, you can check the latest database on the CGDI Official Site.
Would you like to know if a specific car model or ECU type is supported by this tool?
In Dubai, the CG FC200 Automotive ECU Programmer (Full Version) can be purchased through Jabedul Dewan Trading Co, L.L.C., a specialized importer and trainer for automotive diagnostic tools.
Primary Local Supplier: Jabedul Dewan Trading Co, L.L.C.
Jabedul Dewan Trading is a prominent provider in Dubai for automotive programmers and offers technical training as part of its services.
Location: Shop F98, 1st Floor, Nesto Hypermarket Building (Al Fahidi Souq), Meena Bazaar, Bur Dubai, Dubai.
Contact Details:
WhatsApp/Mobile: +971 50 997 0171 or +971 52 714 0052.
Landline: 04-5545933.
Operating Hours: Daily from 9:00 AM to 11:00 PM (open until 10:00 PM according to some listings).
Online Presence: You can browse products on their Official Website or contact them through their Facebook Page for current stock and training schedules.
Other Recommended Suppliers in Dubai
Product Features (Full Version)
ECU Support: Supports over 4,200 ECUs.
Operating Modes: Includes CAN-bus, Bench mode, and Boot mode.
Functionality: Capable of ECU/EGS cloning, data reading/writing, and ISN acquisition.
License: Typically comes with all licenses activated and 1 year of free software updates.
Would you like to know the current availability or schedule for technical training sessions at Jabedul Dewan Trading?
Reviews
There are no reviews yet.