The OBD to RJ45 ESYS ENET LAN Cable is a specialized diagnostic and coding interface used to connect a computer to modern BMW vehicles (specifically F, G, and I-Series models). It acts as a high-speed data bridge between the car’s OBD-II port and a laptop’s Ethernet (RJ45) port to enable advanced software modifications.
Key Components & Specifications
Physical Interface: One end is a standard 16-pin OBD-II male connector for the car; the other is an RJ45 Ethernet connector for your computer.
Hardware Design: High-quality versions typically use Cat5e or Cat6 shielded copper wiring to prevent signal interference during sensitive programming tasks.
Software Mentioned (ESYS 3.23.4 / V50.3): These refer to specific versions of the BMW E-Sys engineering software and the corresponding data files (v.50.3 PSdZData) used for coding and flashing ECUs.
Primary Functions
Coding & Personalization: Used to “unlock” hidden factory features, such as:
Disabling the Auto Start/Stop memory or seat belt reminders.
Enabling Video-in-Motion (watching DVDs while driving).
Activating Digital Speed displays or Sport+ transmission modes.
Diagnostics: Allows for reading and clearing manufacturer-specific fault codes (DTCs) using professional tools like ISTA/D or INPA.
Programming (Flashing): Supports updating firmware on individual Electronic Control Units (ECUs).
Vehicle Compatibility
This cable is designed specifically for BMW’s Ethernet-based communication protocol (DoIP) found in newer models:
F-Series: 1 Series (F20), 3 Series (F30), 5 Series (F10), 7 Series (F01), X3 (F25), etc..
G-Series: All newer models (G20, G30, etc.).
I-Series: Electric/Hybrid models like the i3 (i01) and i8 (i12).
Note: It is not compatible with older E-Series models (e.g., E46, E90), which require a K+DCAN USB cable.
Software Ecosystem
While the cable provides the physical connection, it must be used with specific software (often not included with the cable):
E-Sys: The primary tool for F/G/I-series coding and programming.
ISTA+ (Rheingold): Official BMW dealership-level diagnostic and repair software.
BimmerCode / Bootmod3: Popular mobile and desktop apps for easier DIY coding and engine tuning.
Would you like a step-by-step guide on how to set up the network connection on your laptop for E-Sys to recognize the car?
In Dubai, you can purchase the BMW OBD to RJ45 ENET Cable (compatible with E-SYS 3.23.4 and F-Series coding) either directly from the physical showroom mentioned in your query or through major online marketplaces.
Local Store: Jabedul Dewan Trading LLC
This specific trader is an authorized dealer for various automotive diagnostic scanners and programming tools in Dubai.
Location: Shop F98, 1st Floor, Nesto Hypermarket Building, Meena Bazaar, 64 St, Al Fahidi, Bur Dubai, Dubai.
Contact/WhatsApp: +971 50 997 0171 or +971 52 714 0052.
Store Hours: Typically open daily from 9:00 AM to 11:00 PM.
Services: They specialize in ECU programming, module flashing, and remote installation services for BMW software like E-SYS and ISTA+.
Online Options in the UAE
versions of the ESYS ENET Cable with software download links included.
Note: When purchasing, ensure the cable uses pure copper and high-quality shielding to prevent signal interference during sensitive ECU flashing.
Would you like the technical requirements for the laptop you intend to use with E-SYS 3.23.4?
Reviews
There are no reviews yet.