Autel G-BOX3 – Mercedes-Benz & BMW Key Programming Adapter

The Autel G-BOX3 is a high-performance adapter designed to work with Autel’s MaxiIM and OTOFIX key programming tablets to significantly speed up and simplify complex key programming and ECU tasks. It is the upgraded successor to the G-BOX2, offering dramatically faster password calculations and expanded support for modern engine control units (ECUs) like the Bosch MG1 and MD1.
Core Functions & Capabilities
Mercedes-Benz “All Keys Lost” (AKL): It is primarily used to program new keys for Mercedes DAS3 CAN EIS/EZS vehicles when all original keys are lost.
Speed: Password calculations are 4x to 8x faster than previous methods.
Efficiency: Eliminates the need for repeated insertions and removals of the IR simulator for many EIS types.
Convenience: Allows for programming directly on the vehicle without removing the Electronic Ignition Switch (EIS) in most scenarios.
BMW & VAG ECU Support:
Reads and writes DME/DDE ISN in Boot Mode or Bench Method for approximately 20 types of BMW ECUs (including EDC17, MEVD17, MSV90, and MSD87).
Supports Engine ECU reading/writing for modern BOSCH MD1/MG1 series across brands like BMW, VAG, PSA, and Opel.
Handles VAG ECM IMMO data reading and synchronization for 18 types, including MQB EDC17 and MED17.
Device Compatibility
The G-BOX3 is a versatile accessory that must be used in conjunction with a main programming tablet. It is compatible with:
Autel MaxiIM Series: IM608 PRO II (IM608S II), IM608 PRO, IM608, IM508S, and IM508 (requires XP400 or XP400 Pro programmer).
Autel KM100: Support for this handheld tool is noted in several professional specifications.
OTOFIX Series: Compatible with OTOFIX IM1 and IM2 tablets.
G-BOX3 vs. G-BOX2 Comparison
Feature G-BOX2 G-BOX3
Password Calculation Fast Up to 8x Faster
BOSCH MD1/MG1 Support Yes
BMW ISN Reading10 ECU types 20 ECU types
On-Vehicle Programming Limited Expanded Support
Would you like a wiring diagram or step-by-step tutorial for a specific vehicle model using the G-BOX3?
You can buy the Autel G-BOX3 Key Programming Adapter in Dubai, UAE, from specialized automotive diagnostic tool retailers, including Jabedul Dewan Trading LLC and several authorized distributors.
Where to Buy in Dubai
Jabedul Dewan Trading LLC (Direct Inquiry)
Location: Shop F98, 1st Floor, Al Fahidi Souk, 33c Street, Bur Dubai (near Nesto Hypermarket).
Contact: +971 50 997 0171.
Details: They are an importer and seller of automotive diagnostic scanners and key programmers.
Product Highlights
The Autel G-BOX3 is an upgraded adapter compatible with the IM608, IM508 (with XP400Pro), and OTOFIX IM1/IM2.
Mercedes-Benz: Supports All Keys Lost (AKL) scenarios for DAS3 CAN EIS/EZS, speeding up password calculation by 4x to 8x.
BMW: Enables DME/DDE ISN reading and writing in Boot or Bench Mode, including Bosch MG1 and MD1 ECUs.
Would you like to confirm the current stock availability or pricing with Jabedul Dewan Trading LLC specifically?