DOIP Adapter Cable Devices With CAR VII Bluetooth Connectors for LAUNCH X431

The LAUNCH X431 DoIP Adapter Cable is a specialized diagnostic accessory designed specifically to expand the capabilities of LAUNCH tablet scanners utilizing the DBScar VII (CAR VII) Bluetooth connector. This cable acts as a hardware bridge, allowing your tool to successfully communicate over modern Ethernet-based networks built into newer vehicles.

Key Core Functions

• DoIP Vehicle Diagnostics: It enables the DBScar VII connector to process Diagnostic over Internet Protocol (DoIP) This protocol is mandatory for executing thorough diagnostics, module programming, and clearing fault codes on high-end, modern vehicle fleets.
• High-Speed IMMO Data Transfers: Immobilizer (IMMO) software files and key programming data are massive. Standard wireless Bluetooth transfers are prone to extreme lag or drops. This kit includes an integrated USB wired connection path that safely pipes raw immobilizer data directly from the DBScar VII module straight into the master X431 master tablet.

Compatible LAUNCH Scanners

The DoIP adapter cable explicitly works with LAUNCH master systems bundled with the DBScar VII / DBScar 7 VCI:

• X431 Tablet Series: LAUNCH X431 Pro3 APEX, PRO DYNO, ProS V5.0, PRO3S+ V5.0, PRO ACE, and PRO TT.
• IMMO Programming Series: LAUNCH X431 IMMO Plus and IMMO Elite.
• CRP Series (Bluetooth): Creader Professional CRP919E BT and CRP919X BT.

Note: It is not compatible with standard wired-only CRP tools or older DBScar IV/V modules.

Supported Vehicle Brands

Many modern manufacturers deploy Ethernet architecture for vehicle ECUs. Connecting this cable allows deep diagnostics on:

• BMW (F-Chassis, G-Chassis, and newer)
• Mercedes-Benz
• Land Rover & Jaguar
• Volvo
• Lynk & Co

Basic Connection Routine

1. Connect the 16-pin male OBD2 plug of the DoIP adapter cable into the test vehicle’s diagnostic port.
2. Fasten your DBScar VII Bluetooth VCI module securely into the receiving port of the DoIP adapter cable.
3. For standard module diagnostics, the VCI can communicate wirelessly to the tablet. For complex ECU/IMMO coding, attach the included USB bypass cable directly from the DBScar VII port into the USB port of your X431 tablet to initiate wired data transfer.

Are you hoping to purchase this cable to fix a specific communication error, or are you currently trying to execute a key programming/IMMO procedure on a vehicle? Let me know the exact vehicle year and model so I can verify if it requires this setup!