TNM7000E ECU-KIT – Professional Automotive ECU, MCU & EEPROM Programmer

TNM7000E ECU-KIT – Professional Automotive ECU, MCU & EEPROM Programmer Details

TNM7000E ECU-KIT is a professional multi-function automotive electronics programming platform combining ECU programming, universal chip programming, ECU calibration tools and CAN analysis. It supports OBD and bench workflows plus JTAG, ISP, BDM and GPT interfaces depending on the target controller.

Price

Basic Version – AED 3,500,00

Indian Market Version Upgrade – AED 1,762.80

TNM7000E Indian Version Complete – AED 5,262.80

Main Functions

• ECU/ECM read and write on supported controllers
• OBD programming and flashing
• Bench programming
• Boot / ISP programming
• JTAG and BDM programming
• Bosch GPT support on compatible ECUs
• Flash and EEPROM read/write
• ECU backup, recovery and supported cloning workflows
• Automatic checksum processing on supported protocols
• ECU calibration/map viewing and editing tools
• CAN-BUS analyzer
• Supported dashboard/cluster replacement and synchronization workflows
• SRS/Airbag post-repair module service on supported applications
• EEPROM, MCU, Flash, CPLD and eMMC programming

ECU / Controller Support Examples

Bosch: ME7, M7.8, ME7.9.7, ME17 China, ME17.9.7, EDC17C53, EDC17C39, ME7.4.4 Flash/EEPROM, M7.4.4, M7.4.9, M7.4.11, MG1CS1 and CPGDSH2.

Bosch Motorcycle: MSE3.0, MSE6.0, MSE8.0 and MSE2.0 / MG1CA094.

Continental / Siemens: Hyundai/Kia SIM2K-250, SIM2K-260, SIM2K-251, SIM2K-141, SIM2K-24x, SIM2K-34x, Renault EMS3132 and EMS3134.

Delphi: MT92.1, MT62.1, CRD2.35, MT86, MT38, MT60, MT80, MT22.3, MT22, MT22.1, MT20U2 and MT05-series.

Cummins: CM2150, CM2220, CM554 and CM876.

Toyota / Denso: selected GEN1 applications with virtual online read/CUW converter and Gen2 P5CAN.

Hitachi: selected Nissan applications.

Mitsubishi: selected Mazda3/Mazda6 E6T6xxxx and Mazda3 E6T5xxx ECUs.

SAGEM / Valeo: Renault S3000, Peugeot S2000, Peugeot PL4, J34 and J35.

MCU & Memory Support

Supported families include selected Motorola 9S12, Infineon Tricore TC17xx, Hitachi SH705x, Microchip PIC/DSPIC, Atmel, NXP PCF79xx, Renesas R5F, NEC, Fujitsu MB91F and Cypress S6J devices. Programming technologies include supported Tricore Boot, Aurix JTAG, Bosch GPT, ST10F Boot, Motorola BDM, Denso NBD and Renesas RH850 workflows.

Indian Market Version

The Indian Version adds India-oriented vehicle and module coverage. Published TNM update information includes selected applications involving Ashok Leyland, Eicher, Mahindra, Tata, Maruti-Suzuki, Hyundai and Ford India-market vehicles. Examples include supported Ashok Leyland SPC58 ECU bench applications, Eicher Bosch MD1 applications, Mahindra MD1/EDC17 families, Tata modules, Maruti-Suzuki BCM applications and selected Hyundai/Ford instrument-cluster workflows.

Exact Indian-version support changes as TNM releases software updates. Always verify the ECU/module part number and current software coverage before programming.

Compatibility & Professional Use Notice

Functions vary by ECU/module hardware, processor, software version, vehicle and connection method. Security-related operations should only be performed on owned or authorized vehicles. Cluster work should be limited to legitimate replacement, synchronization and restoration of documented true mileage. SRS functions should be used only for post-repair restoration after the underlying restraint-system fault and damaged components have been repaired or replaced.