We offer you the opportunity to purchase ALL video courses on repair, diagnostics, chip tuning, microcircuits, and working with programmers, software, odometer rollback, etc. from ALL authors, offered recently, including updates from Latest. This course also includes a bonus – a separate PDF course on using the WinOLS editor from Dpf-Egr.
This collection includes:
all courses on diagnostics, panels, soldering, ECU and equipment repair, equipment, chip tuning, and more from all renowned authors, plus the latest updates (80 GB).
“STAR DIAGNOSIS” VIDEO COURSE from DAS + Vediamo. The most complete and updated course with all the bonuses.
Video Course “EVC Chip Tuning WinOLS + ChipTuningPro + TunerProRT”
+ Courses:
ODOMaster
Galetto4
DiaMag Diagnostic Assistant,
Lexus-Toyota-2003,
Roman Gomolin Diagnostics,
Mercedes StarFinder,
VW Passat B6-B7,
Video_Mercedes, WIS_EPC,
Latch Mercedes W204 and W212,
Mini-Course: Writing Keys in Almera Classic,
Video Course “Car Alarms”,
Video Course “AKUBIS”,
Oscilloscope Andrey Shulgin,
DiaMag 2_Pakhomov,
Soldering Secrets for Beginners,
All About the Arrow Motors on Complex Instrument Panels of BMW, MAZDA, and Other Cars,
Updated Connection Set for XPROG-M
Truck ECU Repair
Mercedes PLD-MR Truck ECU Repair
Toyota RAV4 1AZ-FE Automatic Transmission Control Unit (PTC) Repair
VAG and Lexus Key Registration
+ other materials, updates by Pakhomov, Krasnoshchyokov, and other new and rare courses.
The total volume of materials currently totals approximately 200 GB!
These are all valuable courses that are truly worth watching for both beginners and experts. I have over 10 years of experience in diagnosing and repairing automotive electronics and have found a lot of useful information.
The package is supplemented by courses by Evgeny Travnikov and Ramil Abdullin, but many experts consider these “video courses” not worth watching.
The list of courses is below:
Alexey Pakhomov’s School of Diagnostics
- Gasoline Engine Diagnostics (3 parts)
– “Start”
Course Contents –
About the Course
What is diagnostics?
Basic diagnostic tools
Additional diagnostic equipment
Auto repair shop information support
What is gasoline?
Combustion and ignition timing
Knock combustion
Glow ignition
Understanding injection types
Features of fuel-air mixture formation
Safety precautions during diagnostics
Using a smoke generator
Using a laser pyrometer and endoscope
Learning to check the condition of the cylinder-piston group and valves
What is an engine?
The logic of an electronic engine management system
Methods for determining engine load
History of engine management systems
Mastering the scanner
Getting to know the Scanmatik scanner
A little about electricity
What is a sensor
Position sensors
Temperature sensors
Electromagnetic induction sensors
Learning about the Hall sensor
Pressure sensors
Piezoelectric sensors
Air flow sensor designs
Learning to test a mass air flow sensor
What is a lambda probe and why is it needed
Titanium dioxide-based lambda probe
Zirconium dioxide-based lambda probe
Wideband lambda probe
Fuel correction factors
Using a scanner
At the auto service center. Episode 1
At the auto service center. Episode 2
At the auto service center. Episode 3
– “Practitioner”
Course Content
Exhaust Gas Composition for Lean and Rich Mixtures
Exhaust Emission Control Systems and Their Diagnostics
Learning the Structure and Malfunctions of the Intake Tract
What is “Driver Diagnostics”?
Idle Air Control Valves and Their Testing
Resonance, Mechanical, and Turbocharging
– Expert
Course Contents
What is an Engine Tester?
Analog and Digital Signals
Signal Spectrum and Engine Tester Parameters
Autoscope IV and MotoDoc III Engine Testers
Measuring Voltages and Currents
Measuring High Voltage
Measuring Pressure
Getting Started
Studying Valve Timing
Variable Valve Timing Systems
Analyzing Cylinder Pressure Waveforms
Looking at Examples of Real Pressure Waveforms
Studying High Voltage Waveforms
Analyzing Real High Voltage Waveforms Voltage
Alternative Diagnostic Methods by Andrey Shulgin: CSS Test
Alternative Diagnostic Methods by Andrey Shulgin: Px Test
MotoDoc III Engine Tester: Do as I Do!
Autoscope IV Engine Tester: Master the Art in an Hour and a Half
Engine Tester Operation Workshop
Engine Tester and an Old Toyota
- Seminar: “Gas Exchange in a Gasoline Engine”
Seminar Topics:
- Gas Exchange in a Gasoline Engine Cylinder: What is it?
- Gas Exchange Monitoring Methods: Cylinder Pressure Waveform, Gas Quantity Graphs, Scanner Readings
- Gas Exchange in a Conventional Engine and in an Engine with a Variable Valve Timing System
- Analysis of Cylinder Pressure Waveforms for Engines with and Without a Variable Valve Timing System (VVT), with Examples
- Practical Exercise: Recording and Analyzing Pressure Waveforms with the MotoDoc III and USB Autoscope IV Engine Testers.
- Cylinder Gas Volume Graph and Information Extracted from It.
- Cylinder Filling Diagram and Exhaust Loss Diagram.
- Practical Exercise: Obtaining and Comparing Diagrams for VAZ 2110 and Ford Focus Engines.
- Practical Exercise: Simulating Malfunctions and Analyzing the Obtained Diagrams.
- Questions and Suggestions.
- Diesel-Master
Video course content:
How does diesel fuel burn?
How does the Common Rail system work?
How does the system work?
What equipment is required?
On-site diagnostic techniques
How to start a non-starting engine?
Features of systems from different manufacturers
Typical defects and methods for finding them
How to check the turbocharger
Why does a diesel engine start poorly in winter?
How to use a diesel engine tester
How to check compression in 1 minute?
Injection pump: replace or leave it?
How to test an injector directly on the engine
- Auto Electrician from 0 (12 hours of video) hot.png
Video course content:
- Basic concepts of electricity.
- Continuing to learn the basic concepts of electricity.
- Electrical Circuit Elements, Part 1.
- Electrical Circuit Elements, Part 2.
- Constructing Electrical Circuits on a Benchtop.
- Continuing to Construct Electrical Circuits.
- Learning to Read Electrical Schematics.
- Working with Measuring Instruments.
- Energy Balance in Vehicle Electrical Equipment.
- Batteries: Operating Principle, Design, and Parameters.
- Batteries: Diagnostics and Maintenance.
- Design, Diagnostics, and Repair of Automotive Generators.
- Design, Disassembly, Troubleshooting, and Assembly of Automotive Electric Motors.
- Working with Electrical Wiring. Part 1.
- Working with Electrical Wiring. Part 2.
- The Daily Life of an Auto Electrician. Part 1.
- Everyday Life of an Auto Electrician. Part 2.
- Everyday Life of an Auto Electrician. Part 3.
- Car Air Conditioners
Video Course Contents:
After watching this course, you will learn:
Find faults in the air conditioning system;
Detect leaks using two different methods;
Refill the air conditioning system manually and using an automatic station;
Maintain and configure the automatic station.
- Chip Tuning
Video Course Contents:
The video course lasts a total of 4 hours. After watching, you will learn:
What is “chip tuning” and what constitutes the firmware of the ECU;
What is inside the ECU and what changes have occurred there in recent years;
What is a “bootloader” and a “calibration editor”;
How to properly install and configure the CombiLoader loader
What problems can be solved with calibrations;
How to tune an engine with gas equipment;
How to disable lambda control;
And much more!
- Repairing Electronic Control Units (ECUs)
Video Course Contents:
After watching, you will learn:
What tools are needed for the most common ECU repairs,
How and where to buy a power supply and oscilloscope,
How a modern ECU is structured – the processor, memory, buses, and drivers,
How to check the ECU power supply, processor, and peripheral operation.
You will learn:
Solder printed circuit boards with a soldering iron and soldering station,
Check the functionality of the processor and peripherals,
Find faulty ECU components and replace them,
Restore non-functioning ECUs,
Install a memory chip in a BOSCH ECU for chip tuning.
- Profitable Auto Repair
Video Course Contents:
What’s the difference between a do-it-yourself business and a real business?
How to determine your goal Spruce?
How to break down a goal into building blocks and see the path to achieving it?
What are we selling: a car repair service or something else?
How to create a Unique Selling Proposition?
A website. What should it have that simply won’t work without it?
What are the rules for creating a website layout, and who should do it?
How to work less and earn more, and why is this possible?
Dmitry Krasnoshchekov’s Automotive Electronics School
- ODO-Master Start
Brief Description: This video course will teach you how to maximize profits with minimal equipment investment. After completing this training, you will be able to offer odometer correction services for at least 70% of all known instrument clusters and dashboards, allowing you to start your own business or expand an existing one.
- How to Order Equipment from China Yourself
Brief Description: Everyone uses diagnostic tools and various devices for repairing car electrical systems, and the question arises: where can I buy them cheaper? In China? But how? This video course answers all these questions.
- VCDS for Beginners
Brief Description: 90% of people who own a VCDS scanner don’t use even 50% of its capabilities! Finally, start harnessing the full power of this valuable device and discover new ways to earn money from satisfied customers!
- Learning to Understand Microcircuits
Brief Description: This mini-training is for beginning diagnosticians. It discusses the following questions: what types of microcircuits are there, how to distinguish them, and how to work with them. This course covers all this and much more.
- Soldering Secrets for Beginners
Brief Description: This video course clearly demonstrates and explains the nuances of soldering when working with a soldering station, how to avoid burning circuit boards and components, and how to solder and desolder large processors and microcircuits. Auxiliary soldering materials are also discussed.
- All About Instrument Gauge Motors
Brief Description: How to properly remove and install instrument gauges on dashboards when rolling back the odometer and repairing dashboards. You’ll be able to easily handle dashboards for BMWs, Mazda 6s, similar vehicles, and many others. If necessary, you can repair other people’s work and earn extra money.
- Converting Miles to Kilometers
Brief Description: With this package, you’ll learn how to convert Fahrenheit to Celsius, gallons to liters, and miles to kilometers on US vehicles.
- XProg-M – the electronics engineer’s main weapon
Brief description: Xprog-m allows you to correct odometers, repair immobilizers, program and read MCUs, controllers, memory chips, and BMW EWS modules. But does everyone know how to use it 100%?
Here, all the secrets of using the device are revealed.
- Tachosoft Mileage Calculator
Brief description: In this course, odometer correction experts share their knowledge of using the calculator.
They explain typical errors and what to look out for.
- R270 Programmer
Brief description: The R270 CAS4 BDM Programmer is designed for odometer correction in BMW, Mercedes, and Land Rover vehicles. Those who purchase the device are often unaware of all its functions and capabilities, and where they can and cannot be used.
This video course will help you understand
Be the first to review “Video Courses on ECU Repair, Diagnostics, Chip Tuning, and microcircuits from All Authors”
Related products
Reviews
There are no reviews yet.