Kawasaki motorbike 6pin to obd obd2 diagnostic cable
90.00 AED
Kawasaki six-pin to OBD2 diagnostic adapter cable for motorcycles with the matching diagnostic connector. Use with a compatible scan tool and supported vehicle protocol. Confirm connector shape, pin wiring, model year and market version before purchase.
A Kawasaki 6-pin to OBD2 adapter is a diagnostic cable designed to bridge the proprietary 6-pin diagnostic port on your motorcycle to a standard 16-pin OBD2 scanner. This allows you to perform DIY maintenance like reading/clearing trouble codes and viewing live engine data without a dealership visit.
Key Compatibility & Identification
Before purchasing, it is critical to identify your bike’s port type, as Kawasaki uses different connectors based on regional emission standards:
White 6-Pin (Euro 4): This is the most common 6-pin port for models roughly between 2016 and 2020. It supports both K-Line and CAN-BUS protocols.
Red 6-Pin (Euro 5): Found on newer 2021+ models. If your diagnostic port is red, a standard Euro 4 6-pin adapter will not fit.
4-Pin Connector: Some older or specific models (like older Ninja 300s or Versys) use a 4-pin port instead of a 6-pin.
Popular Compatible Models
The 6-pin adapter typically fits the following motorcycles (2017+ generally):
Z-Series: Z800, Z900, Z900RS, Z1000.
Ninja/ZX Series: ZX10R, ZX14R, Ninja 400 (certain years), Ninja 650.
Other: H2/H2R and Versys 1000.
What You Can Do with This Cable
When paired with a compatible OBD2 scanner (like an ELM327 Bluetooth dongle) and an app like TuneECU or Torque, you can:
Read & Clear Codes: Reset the “Check Engine” light yourself.
View Live Data: Monitor RPM, engine temperature, gear position, O2 sensor voltage, and throttle position in real-time.
ECU Reset: Perform basic service resets on supported models.
Reviews
There are no reviews yet.