Sm2 Pro J2534 Vci Ecu Programmer Read Scanmatik 2 Pro Flash 67 In 1 Pcm Bench Car Computer

How to Installation sm2 Pro

sm2 Pro software Download version V2.21.22

SM2 Pro J2534 VCI ECU Programmer((V2.21.22) Read&Write Tool Supported 67 Modules Scanmatik 2 Pro FLASH 11/67/69 IN 1 PCM BENCH 11IN1 67IN1 69IN1
What are our Advantages:
1. Our hardware supports all J2534 protocol software
2. don’t need to register and active device. you can work it directly. and more pay attention to protecting personal privacy.
3. when you update your device by mistake. it will not be locked. you just come back to correct driver version to work.
4. support newest cars and do online programming (with online account) .for example GDS software works with the 2021 year GM Buick ENVISION, 2021 year CADILLAC XT5 .we have tested online programming and working perfectly!!!
SM2 PRO J2534 VCI Functions:
1. Read and write ECU data
2. ECU clone
3. ECU parameter adjustment
4. ECU maintenance engineering
5. Chip tuning
6. Read ECU maps
7. Checksum correction
8. Stage1-3, gearbox tuning , LC, sportdisplay , immo off, adblue off, dpf off, dtc off ,vmax ,swirl off
9. Read Flash and ep files
10. Powertrain adjustment
11. OBD2 reading
12. Cover-free wielding-free no disassembly data reading, greatly reduce the risk of destroying the ECU, bench mode.
13. Cover-opening data reading, boot mode
SM2 PRO 67 Licenses（V1.20 Dongle）:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 30 31 32 33 34 35 36 38 40 42 43 45 46 47 48 50 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74
SM2 PRO 69 Licenses（V1.20+V1.21 Dongle）:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 30 31 32 33 34 35 36 38 40 42 43 45 46 47 48 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 76
What is the difference between SM2 PRO J2534 VCI And BENCH, FLASH, OBD?
1. Different SN Number
BENCH, FLASH, OBD. All SN numbers are A55259.
Actually, they are the same hardware, just a different case, you also can check the PCB board of them.
SM2 PRO J2534 VCI SN:A78370 . it is different as others in the market.
2. Different Hardware Version
BENCH, FLASH, and OBD hardware version is 2.21.18. from 03.2019 year. it is very old!
SM2 PRO J2534 VCI hardware version is 2.21.21 from April 14, 2022 . it is very new version. It’s already updated 16 versions vs other hardware. and it was added many new functions and more stable.
200 Newly-added Bosch MED/EDC17 Read/Write Protocols Without Opening the Cover.
VAG Simos 12.1, 12.2
VAG Simos PCR2.1
FCA GPEC2, GPEC2A, GPEC4, GPEC4LM
Hyundai/KIA SIM2K-240, SIM2K-241,SIM2K-250, SIM2K-251, SIM2K-260, SIM2K-305, MT86
Ford/LR SID208 Flash read
Scania EMS S8 BAM. Just 3 point PCB connection into VIA holes. Can be connected without removing gel.
PSA SID208
MB SID307, SID310
Renault SID307, SID309, SID310
Porsche SDI21.x
Mitsubish*i E6T83XXX, E6T32xxx
Isuzu Transtron SH72544R
Isuzu Transtron L4.3
Hino EDC7UC31
Hyundai, Greatwall DCM6.2AP
Coming Soon:
VAG Simos 18.1, 18.2
VAG Simos 18.10
FCA Marelli 8GMK/8GML, MJ9DF, 10GF
FAL Marelli MJ8DF/8F2, 8GMB/8GMC/8GMF/8GMW/8GSF/8GSW
BMW MSD80, MSV80, MSD81, MSD85.0/MSD85.4, MSD85.1/MSD85.3, MSD87.1/MSD87.2, MSV90

The SM2 Pro (also known as Scanmatik 2 Pro) and the 67-in-1 module set are professional tools used for automotive ECU (Engine Control Unit) and TCU (Transmission Control Unit) diagnostics, programming, and chip tuning.
SM2 Pro J2534 VCI
The SM2 Pro is a high-performance Vehicle Communication Interface (VCI) that serves as a bridge between your computer and a car’s computer.
Protocol Support: It supports the standard J2534 PassThru protocol, allowing it to work with official dealer software from brands like GM, Ford, Toyota, Honda, BMW, and Mercedes-Benz.
Operations: It is primarily used to read and write ECU data, perform ECU cloning, adjust parameters (tuning), and carry out professional-level diagnostics.
Modes: It supports multiple connection modes, including OBD2 (through the car’s port), Bench (connected directly to the ECU pins without opening the case), and Boot (opening the ECU case for deep access).

The “67 Module” (67-in-1)
The “67-in-1” refers to a USB Smart Dongle that contains licenses for 67 different software modules, typically for use with software like PCMFlash.
Function: Each “module” represents a specific set of automotive protocols or car brands that the software can communicate with.
Pre-Activated: These dongles usually come with all 67 modules pre-activated, meaning you don’t need to pay annual subscription fees or register the device online to start working.
Vehicle Coverage: It supports thousands of car brands and models, including advanced functions for reading/writing the ECU and Gearbox for power upgrades or cloning.
Key Features at a Glance
No Subscription: Most versions work offline with no annual fees.
High Stability: The SM2 Pro hardware is designed to prevent data loss or ECU corruption during sensitive programming tasks.
Portability: It is a compact, rugged tool designed for both workshop
Would you like to know which specific car brands or ECU types (like Bosch or Continental) are supported by these 67 modules?
The SM2 Pro (also known as Scanmatik 2 Pro) is a professional-grade automotive diagnostic and ECU programming tool. In Dubai, UAE, it is available through the merchant Jabedul Dewan Trading L.L.C,
Product Overview
The SM2 Pro J2534 VCI is a high-performance vehicle communication interface designed for workshop-level diagnostics, ECU flashing, and module reprogramming.
Key Functions: Reading and writing ECU data, ECU cloning, parameter adjustment, chip tuning, and checksum correction.
Compatibility: Supports a wide range of vehicle brands including GM, Ford, Toyota, BMW, Mercedes-Benz, and Honda.
Software Support: Compatible with popular professional software like PCMFlash (67-in-1 modules), Forscan, IDS, Techstream, and GDS2.
Hardware Features: Supports both 12V and 24V systems (suitable for cars and trucks) and connects via USB or Bluetooth.
Buying from Jabedul Dewan Trading (Dubai, UAE)
Jabedul Dewan Trading offers the OEM version of the SM2 Pro with the following details:
Price: Approximately AED 550.00. (Note: Other listings for similar professional sets can reach up to AED 3,000.00 depending on the included software dongles and modules).
What’s Included: Typically includes the SM2 Pro J2534 VCI unit, a 67-module dongle, a switch for ECM/TCM/BCM programming, and technical support.
Warranty & Support:
The merchant provides free installation and technical support for the device.
Purchases through Amazon.ae are covered by a 15–30 day return policy, providing a baseline level of buyer protection.
The manufacturer description often lists “best after-sale service” for peace of mind, though specific long-term hardware warranty periods (e.g., 1 year) should be confirmed directly with the seller at the time of purchase.
Merchant Details
Seller Name: JABEDUL DEWAN TRADING L.L.C
Location: Dubai, United Arab Emirates.
Availability: Usually available for free delivery within the UAE.
These product listings offer details on the SM2 Pro J2534 VCI, including pricing and features available from Jabedul Dewan Trading: