Newest V1.27.001 Version for FORD UCDS PRO+ Supports FORD Cars With 35 Tokens Full License UCDS pro UCDS Full Activated
Description:
The UCDS consists of drivers of the serial bus USB-serial (recommended drivers FTDI), hardware adapter and the actual UCDS-programm.
The software interface of the UCDS interface has main window’s mode. You need to select the type of the vehicle or select the service mode for adapter`s firmware update or other service functions.
UCDS currently works with the following platforms: For Focus II 2004-2011; For Focus III 2011, 2015; For Kuga I, For Kuga II; For C-MAX; For S-MAX; For MONDEO IV; For Mondeo 2015; For Galaxy; For Tansit; For Fiesta 2008, 20015 etc..
New Released Diagnostic Adapter with neweest software V1.27.001 can replace For Ford Vehicle Communicate Module 2, just one difference, UCDS cannot key programming, but UCDS (Universal CAN Diagnostic System) for Ford can support Mileage Correction and it is full function type.
Please note the important information:
Please Disconnect internet when Run software.
Please don’t update online, otherwise it will be locked.
MUST Click “No” when message show out to ask you update.
Highlights to get UCDS PRO+:
UCDS Software: V1.27.001
UCDS full license adapter: full mode activated, access to existing sections of the software, such as: VBF Loader, Update Wizard and Direct Config.
With 35 tokens: token only need for mileage programming & ECU chip tuning function (When use up tokens, send back to add token, Need pay extra cost.)
UCDS support odometer correction
For Ford cars from 2004 to 2017 Year.
Full Mode Activated
Best replacement for Ford Vehicle Communicate Module 2
Functions:
1. Read the fault code
2. Clear trouble codes
3. Read the data stream
4. Data recording
5. Module reset
6. Module Installation
7. Re-program the ECU TCM BCM and so on
8. Clear the airbag (RCM) collision data
9. Read, backup, edit, and erase AsBuilt files
10. Read, backup, edit, and erase the underlying DirectConfig configuration file
11. Support power to enhance the brush to write, such as Mondeo 2.0T 200HP brush 240HP, 12 Fox 85HP brush 105HP, 150HP brush 163HP
12. Support VBF file directly to write
13. Support BIN file directly to write
14. Support online update vehicle entire module (Update Wizard)
15. Support For Fox MK2, 12 for Fox MK3, winning, S-Max and other models meter mileage clear, brush to write
For UCDS-Ford New Features:
The dashboard can be displayed from English to Chinese; the new for Mondeo power can be upgraded from low to high; the navigation OPS of Escape can be flashed; the SCT program can be input; the SCT device (token limited) can be replaced.
Supported Vehicles:
For Fox MK2 (2004-2014) C307
New For Focus MK3 (2012-2017) C346
For Wing tiger 15 wing tiger 17 wing tiger
For Mondeo wins S-Max Galay
New for Mondeo 13 (Mondeo 5)
For Explorer
For Transit
For Carnival B-Max
For Wing Bo
And other new models
UCDS allows the user to:
Diagnose the majority of car parts and components that are connected to a central electrical module (GEM, BCMii) through the data bus (CAN);
Receive data embedded in the car components and modules, including their part number, version, calibration, serial number;
Make the necessary changes to the central configuration of the car, and change the configuration of the modules and components if necessary;
Update the calibration (firmware) of the modules and components of the vehicle, including the engine (the so-called chip tuning);
Perform regular language adaptation of the audio modules manufactured by for SONY (Russian language only);
Other
Package List:
1 x UCDS PRO
1 x CD Software;
The Ford UCDS PRO+ V1.27.001 is a specialized diagnostic and programming tool for Ford vehicles (Universal CAN Diagnostic System). It is widely considered a more flexible alternative to the Ford VCM II, particularly for advanced modifications.
Key License & Token Details
Full Mode Activated: The “Full License” grants permanent access to core software sections like the VBF Loader, Update Wizard, and Direct Config without needing tokens for every use.
35 Tokens: Tokens are only consumed for specific commercial operations, primarily mileage programming (odometer correction) and ECU chip tuning (engine power upgrades).
Offline/Online Programming: Unlike many other tools, it supports both online and offline programming of modules.
Supported Vehicles (2004–2017)
The V1.27.001 software primarily covers Ford platforms from 2004 to 2017:
Focus: MK2 (2004–2014) and MK3 (2012–2017).
Kuga: Kuga I and Kuga II.
Mondeo: Mondeo IV and Mondeo 2015+ (Mondeo 5).
Others: C-MAX, S-MAX, Galaxy, Transit, Fiesta (2008, 2015), Explorer, and B-Max.
Main Functions
Diagnostics: Read and clear fault codes (DTCs), data streaming, and module resets for most CAN-bus connected components.
Configuration: Read, backup, and edit AsBuilt files and DirectConfig files to change vehicle features.
ECU Re-programming: Flash and update firmware for the ECU, TCM (transmission), BCM (body control), and ABS modules.
Special Operations: Clear airbag (RCM) collision data, perform odometer correction, and upgrade engine power (e.g., remapping a 150HP Focus to 163HP).
Language & Display: Language adaptation for Sony audio modules (e.g., Russian) and changing dashboard displays (e.g., English to Chinese).
Important Usage Notes
Internet Connection: You must disconnect from the internet while running the software to prevent the adapter from being locked or bricked by forced updates.
OS Compatibility: It is recommended for use with Windows XP or Windows 7 32-bit systems.
Would you like to know more about how to use the Direct Config section for specific vehicle modifications?
You can buy the Ford UCDS PRO+ V1.27.001 (35 Tokens Full License) directly from Jabedul Dewan Trading L.L.C. in Dubai. They operate both a physical storefront and an online presence through Amazon.ae.
Where to Buy
Physical Store: Jabedul Dewan Trading Co, LLC is located in Bur Dubai.
Address: Shop F98, Nesto Hypermarket Building, Meena Bazaar, 3 64 St, Al Fahidi, Dubai.
Hours: Open daily from 9:00 AM to 11:00 PM.
Contact: You can reach them via phone or WhatsApp at +971 50 997 0171.
Online (Amazon UAE): They are a verified seller on Amazon.ae, where the product is listed for approximately AED 214.13 AED 186.20.
Product Details
The version offered by this trader typically includes:
Software: V1.27.001 (Newest Version).
License: Full License, fully activated.
Tokens: Includes 35 tokens for specialized functions like odometer programming and ECU flashing.
Compatibility: Supports Ford vehicles (typically up to 2017 models for this specific version) for diagnostics, coding, and adaptations.
Why Choose This Seller?
Authorized Dealer: They are an authorized dealer for several automotive diagnostic brands including Thinkcar and TopDiag.
Technical Support: Customer reviews highlight that they provide 24-hour technical support for their diagnostic tools.
Would you like to know more about the specific Ford models compatible with the V1.27.001 version?
Reviews
There are no reviews yet.