VNCI MDI2 diagnostic scanner for Cadillac, Chevrolet, Buick, GM vehicles，Compatible with the latest Origianl software driver Plug and play without installing any third-party patches,it can be replace origianl GM MDI2 interface. VNCI MDI2 come ture 100% origianl GM MDI2 interface function,but it only cost 10% price.
VNCI MDI2 is fully comparable to the original performance, in the processing system speed, security and programming speed have reached the original level.
VNCI MDI2 is compatible with the original driver. MDI2 is applicable to General Motors Global A platform and global B platform series models, which can be used to repair automotive electronics and automotive electronics systems. Through MDI2 equipment data transfer transmission, PC computer softening system can be used to diagnose and program automotive electronics and electronic systems.
VNCI MDI2 supports the following Diagnostic systems: RDS, GDS2, Data Bus Diagnostic Tool (CAN Bus analyzer), for Tech2win. It also supports A Pass-Thru offline programming program: TIS2Web-SPS, which replaces the original MDI generation device functionality, but is only available on global A-platform models. It also supports global DPS offline programming and Pan-Asian DPS programming.
The VNCI MDI2’s biggest advantage is support for GM Online Techline connect(TLC) software and the latest GM series CAN FD module for diagnosis and programming of CAN FD protocol modules Support SAE J2534 Pass-Thru: Available with GM PC-based diagnostics and reprogramming applications. Support for pass-through programming stored in flash calibration files such as vehicle on-board controllers (PCM, ABS, VTD, etc.)
Advantage
100% support CAN FD and DoIP communication
No need to change any files or third-party software, just plug and play.
Support TLC online software, synchronization compatible with the original latest driver
Simulate the original hardware device without worrying about hardware verification
Support B platform offline programming, decrypt 27 security check algorithm
Free registration of GDS, DPS, for Tech2win software
Faster and safer
Three connection modes:
USB Connection Mode: Connect via the USB cable.
AP(Access Point) Connection Mode: Connect computer with VNCI MDI2 via the point-to-point, similar to Bluetooth connection.
Station connection mode(WLAN Connection): Connect the VNCI MDI2 device and the computer to the same local area network.
VNCI MDI2 Features
Support for GMC, for Chevrolet, for Buick, for Cadillac and for Opel models from 1996 to the present
Support SAE J2534 Pass-Thru, CAN FD, DoIP, UART, Class2, KWP2000, GMLAN(CAN) protocol
Support key matching, offline and online module programming, diagnosis
Support CANFD/DoIP module diagnosis and programming
Support for GM global A platform models and global B platform models
Support Pass-Thru programming program TIS2WEB-SPS, compatible with all functions of MDI generation
Three connection modes
USB Connection Mode: Connect via the USB cable.
AP Connection (Wifi connection directly) Mode: Connects to a computer via the built-in WIFI of VNCI MDI2, similar to Bluetooth connection.
Station Connection Mode(WLAN Connection): Connect the VNCI MDI2 device and the computer to the same local area network. AP connection mode and station connection mode can be switched through the device button.
The VNCI MDI2 is a professional diagnostic and programming interface designed as a high-performance alternative to the genuine General Motors (GM) MDI2 (Multiple Diagnostic Interface 2). It is specifically used for servicing Cadillac, Chevrolet, Buick, and GMC vehicles, offering what is often termed “original factory mode” because it simulates the authentic hardware to work seamlessly with official GM software without needing third-party modifications.
Core Capabilities & Software Compatibility
The tool acts as a bridge between a vehicle’s onboard ECU network and a computer running GM’s specialized diagnostic applications:
Techline Connect (TLC): Fully compatible with GM’s latest online platform for integrated diagnostics and programming.
GDS2 (Global Diagnostic System 2): Used for diagnostics on 2010 and newer GM vehicles.
Tech2Win: An emulator that provides the functionality of the older Tech 2 handheld tool for 1996–2013 vehicles.
Programming Support: Supports SPS2 (Service Programming System) for online module programming and DPS (Development Programming System) for advanced engineering-level tasks.
SAE J2534 Pass-Thru: Complies with standard protocols for ECU reprogramming across various systems like PCM, ABS, and VTD.
Key Technical Features
Protocol Support: Unlike basic OBDII scanners, it supports advanced protocols required for modern vehicles, including CAN FD and DoIP (Diagnostics over Internet Protocol), which are essential for newer Global B platform models.
Full Platform Coverage: It is compatible with both Global A and Global B architecture, covering GM vehicles from 1996 to the present.
Hardware Simulation: It uses the original GM MDI2 driver and is designed to bypass hardware verification, ensuring it is recognized by official software as a genuine device.
Security Decryption: It includes the ability to decrypt the 27 security check algorithm required for efficient offline programming on B-platform vehicles.
Connection Modes: Offers three flexible ways to connect to a PC: USB, AP (Direct WiFi), and Station Mode (Local WLAN).
Difference from Original GM MDI2
While the VNCI MDI2 is engineered to match the original’s performance, it is an aftermarket solution typically available at a significantly lower cost (often cited as less than 10% of the genuine unit’s price) while supporting the same operating systems, including Windows 10 and 11.
Are you looking to use this for offline programming or do you need assistance setting up Techline Connect with the device?
& dealer jabedul dewan trading llc
In Dubai, the VNCI MDI2 GM diagnostic tool for Cadillac, Chevrolet, and Buick can be purchased from specialized automotive diagnostic suppliers. While it is available through major online platforms, Jabedul Dewan Trading LLC is a prominent local dealer specifically mentioned in your request and verified as a specialist in this field.
Local Dealer: Jabedul Dewan Trading LLC
Jabedul Dewan Trading Co, LLC is a highly-rated authorized dealer and importer of automotive diagnostic scanners and programming tools in Dubai.
Location: Nesto Hypermarket, Meena Bazaar – Shop F98 – 3 64 St – Bur Dubai – Al Fahidi – Dubai.
Hours: Open daily from 9:00 AM to 11:00 PM.
Contact: +971 50 997 0171.
Specialization: They specialize in professional scanners (Thinkcar, Jdiag) and offer technical support for diagnostic software and ECU programming.
Online Presence: They maintain an active presence on Amazon.ae and Facebook.
Online & Alternative Sellers in the UAE
If you prefer online shopping or alternative professional suppliers, these platforms also stock GM MDI2 tools:
Tool Compatibility & Features
The VNCI MDI2 is a high-performance alternative to the genuine GM MDI2 and typically includes:
Protocols: Full support for CAN FD and DoIP, which are essential for newer GM vehicles (Global A/B platforms).
Software Support: Compatible with official GM software like Techline Connect (TLC), GDS2, DPS, and Tech2win.
Connectivity: Supports high-speed data transfer via Wi-Fi, LAN, and USB.
Would you like to know about the specific software license requirements or online programming access for these GM tools?
Reviews
There are no reviews yet.